Heater Hose for 1992-2000 Lexus SC300 & More - Gates 19125

Be the first to review this product

$33.99

MPN: 19125

Item Package Quantity: 1

Current Stock:

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Gates HVAC Heater Hose P/N:19125

$33.99

Description

Keep coolant flowing between the engine and heater core with the Gates HVAC Heater Hose 19125, a premium factory-molded hose that drops in on the 1995-1998 Ford Windstar (V6-3.0L, V6-3.8L) and the 1992-2000 Lexus SC300 (L6-3.0L). This small-I.D. molded hose is an OEM-style design shaped to fit today's smaller, tighter-fitting engine compartments, and in these applications it routes at positions such as pipe-2 to the auxiliary heater, pipe-4 to the auxiliary heater, and intake manifold to the valve.

Molded EPDM construction: EPDM tube, synthetic fiber knit reinforcement, and EPDM cover with all the quality features of Gates molded coolant hose, similar to OEM specifications.
Resists electrochemical degradation: engineered to resist ECD, the leading cause of hose failure.
Rated to spec: meets SAE 20R3 Type EC Class D-1 and D-2, with a temperature range of -40°F to 275°F.
Versatile use: suitable for coolant, water, and air applications, and also approved for marine use.

Centerline length is 20 in (508 mm) with 0.63 in (16 mm) inside diameter at each end. Do not use for fuel or oil transfer. Gates recommends replacing hose clamps each time a new coolant hose is installed. Country of origin: United States.

Interchange: F58H 18C266 BB · F58Z 18472 Q
F58H18C266BB · F58Z18472Q · 18223L · 87887 · E87887 · 64661 · 11125 · 8724524300

Manufacturer's Description

Product Specs

Buyer's Guide

Interchange Part Numbers

This part cross-references / interchanges with the following part numbers:

18223L, 19125, 87887, E87887, F58H 18C266 BB, F58Z 18472 Q, 64661, 11125, 8724524300

Frequently Asked Questions

What vehicles does the Gates 19125 heater hose fit?

It fits the 1995-1998 Ford Windstar (V6-3.0L and V6-3.8L) and the 1992-2000 Lexus SC300 (L6-3.0L). Check the Buyer's Guide tab to confirm fitment for your vehicle.

What is this hose made of?

It has an EPDM tube, synthetic fiber knit reinforcement, and an EPDM cover. It's a factory-molded, OEM-style design that meets SAE 20R3 Type EC Class D-1 and D-2 specifications.

What is the size of the hose?

The centerline length is 20 inches (508 mm), and the inside diameter is 0.63 inches (16 mm) at each end.

Can I use this hose for fuel or oil lines?

No. This hose is designed for coolant, water, and air applications and is approved for marine use, but it must not be used for fuel or oil transfer applications.

Should I replace the hose clamps when installing this hose?

Yes. Gates recommends replacing the hose clamps each time a new coolant hose is installed to help ensure a proper seal.