Gates HVAC Heater Hose P/N:19876

Be the first to review this product

$19.99

MPN: 19876

Item Package Quantity: 1

Current Stock:

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Gates HVAC Heater Hose P/N:19876

$19.99

Description

Keep coolant flowing to the heater core with the Gates Molded Heater Hose 19876, a factory-molded, OEM-style hose shaped to fit today's smaller, tighter-fitting engine compartments. It installs as a direct-fit replacement at the heater inlet and heater outlet positions for the 2005-2019 Nissan Frontier, 2016-2018 Nissan NP300, 2016-2018 Nissan NP300 Frontier, and 2009-2012 Suzuki Equator — see the Buyer's Guide tab for engine-specific coverage.

OEM-style molded design: Small I.D. molded coolant hose built with the quality features of Gates molded coolant hose and similar to OEM specifications; usable for coolant, water and air applications, and also approved for marine use.
EPDM construction: EPDM tube, synthetic fiber knit reinforcement and EPDM cover, engineered to resist electrochemical degradation — the leading cause of hose failure.
Rated to spec: Meets SAE 20R3 Type EC Class D-1 and D-2 specifications, with a temperature range of -40°F to 275°F (-40°C to 135°C).

Gates recommends replacing the hose clamps each time a new coolant hose is installed. Caution: do not use for fuel or oil transfer applications.

Interchange: 18391L · 64607 · E91225 · 92400EA000 · 11876 · 7438282Z00

Manufacturer's Description

Product Specs

Buyer's Guide

Interchange Part Numbers

This part cross-references / interchanges with the following part numbers:

18391L, 19876, 64607, E91225, 92400EA000, 11876, 7438282Z00

Frequently Asked Questions

What vehicles does this Gates 19876 heater hose fit?

It's a direct-fit replacement for the 2005-2019 Nissan Frontier, 2016-2018 Nissan NP300, 2016-2018 Nissan NP300 Frontier, and 2009-2012 Suzuki Equator. Check the Buyer's Guide tab for engine-specific coverage.

Where does this hose install?

It is cataloged for the heater inlet and heater outlet positions, routing coolant between the engine and heater core.

What is this hose made of?

It uses an EPDM tube, synthetic fiber knit reinforcement and an EPDM cover, engineered to resist electrochemical degradation — a leading cause of hose failure.

What specifications does it meet?

It meets SAE 20R3 Type EC Class D-1 and D-2 specifications and carries a temperature range of -40°F to 275°F (-40°C to 135°C).

Should I replace the hose clamps too?

Yes. Gates recommends replacing the hose clamps each time a new coolant hose is installed. Do not use this hose for fuel or oil transfer applications.