Heater Hose for 1996-1999 Ford Taurus & More - Gates 22924

$124.99

Vehicles this part fits

    Part number: 22924
    UPC: 072053582161
    Condition: New
    Weight: 1.00 LBS
    Item Package Quantity: 1
    $124.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:22924
    Gates HVAC Heater Hose P/N:22924
    $124.99
    $124.99

    Gates 22924 heater hose for the 1996-1999 Ford Taurus V6 3.0L and other vehicles carries coolant between the thermostat and the water pump. This Gates molded heater hose, also listed as an HVAC heater hose, is a modular assembly made for specific applications.

    • Modular design with 2 branches and an outlet
    • Specifically engineered materials resist collapse under vacuum
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • EPDM tube with synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover
    • Meets SAE 20R3 EC Class D1 under 25 mm (1 in.) ID, SAE 20R4 EC Class D1 for 25 mm (1 in.) ID and over

    Quick facts

    • Part: Gates 22924 heater hose
    • Also called: HVAC heater hose
    • Fits: 1996-1999 Ford Taurus V6 3.0L and other vehicles
    • Position: Thermostat to water pump (branched hose assembly)
    • Material: EPDM, plastic
    • Condition: New

    Coolant seepage, a cracked or swollen hose or weak heater output can mean this hose is worn, though a failing thermostat or water pump can be behind them as well, so trace the source before replacing anything.

    Fits

    It fits the 1996-1999 Ford Taurus V6 3.0L, the 1996-1999 Ford Sable and the 1996-1999 Mercury Sable V6 3.0L.

    Specifications

    Fit and size

    • Position: thermostat to water pump (branched hose assembly)
    • Quantity per vehicle: 1
    • Centerline length: 409 mm (16.1 in)
    • End 1 inside diameter: 16 mm (0.64 in)
    • End 2 inside diameter: 16 mm (0.64 in)
    • End 3 inside diameter: 0.72 in

    Build and materials

    • Material: EPDM, plastic
    • Construction: molded, modular
    • Temperature range: -40°F to +257°F (-40°C to +125°C)
    • Condition: New
    • Country of origin: United States

    In the box

    This listing is one heater hose with its two branches and outlet. Each vehicle takes one.

    Installation notes

    • Replace the clamps each time a new coolant hose is installed.
    • Use this hose for coolant only, not for fuel or oil transfer.

    Interchange: F7DZ 8548 AA
    18327L · E90731 · 87780 · E87780 · 62860 · KM4491 · 9559

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    18327L, 22924, E90731, 87780, E87780, F7DZ 8548 AA, 62860, KM4491, 9559

    Frequently Asked Questions

    Is Gates 22924 the heater hose for the 1996-1999 Ford Taurus V6 3.0L?

    Yes. Gates 22924 fits the 1996-1999 Ford Taurus V6 3.0L, and it also fits the 1996-1999 Ford Sable and the 1996-1999 Mercury Sable V6 3.0L.

    Does Gates 22924 come with its branches or are they separate?

    Yes, the branches are included. Gates 22924 is a modular assembly with 2 branches and an outlet, and it has no quick-connect fittings.

    What inside diameter do the ends of this heater hose have?

    Ends 1 and 2 are 16 mm (0.64 in) inside diameter, and end 3 is 0.72 in. The centerline length is 409 mm (16.1 in).

    What temperature range can this EPDM heater hose handle?

    Gates 22924 has a temperature range of -40°F to +257°F (-40°C to +125°C). Its EPDM cover resists heat, ozone and chemical coolants.

    Should I replace the clamps when I install this Gates heater hose?

    Yes. Clamps should be replaced each time a new coolant hose goes on. This hose is for coolant only, not for fuel or oil transfer.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review