Heater Hose for 2005 Chevrolet Silverado 2500 & More - Gates 19082

$36.99

Vehicles this part fits

    Part number: 19082
    UPC: 072053454802
    Condition: New
    Weight: 0.80 LBS
    Item Package Quantity: 1
    $36.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:19082
    Gates HVAC Heater Hose P/N:19082
    $36.99
    $36.99

    Gates 19082 heater hose for the 2005 Chevrolet Silverado 2500 V8 5.3L and other vehicles carries engine coolant through the heater circuit. This Gates molded heater hose is also called an HVAC heater hose.

    • Factory-molded shape for smaller, tighter engine compartments
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40 °F to 275 °F (-40 °C to 135 °C)
    • Approved for coolant, water and air applications, and for marine use

    Quick facts

    • Part: Gates 19082 heater hose
    • Also called: HVAC heater hose
    • Fits: 2005 Chevrolet Silverado 2500 V8 5.3L and other vehicles
    • Position: Valve to engine, heater to pipe-1
    • Material: EPDM
    • Condition: New

    A worn heater hose can show up as coolant drips, a cracked or soft hose, or heater air that stays cool. Cool heater air alone does not point to this hose; a stuck thermostat is another common cause.

    Fits

    Fitment includes the 2005 Chevrolet Silverado 2500 V8 5.3L, the 2003-2005 GMC Savana 2500 V8 5.3L, the 2003-2014 Savana 2500 V8 6.0L, the 2003-2017 Savana 2500 V8 4.8L, the 2003-2014 GMC Savana 3500 V8 6.0L and the 2003-2017 Savana 3500 V8 4.8L. This listing is one hose, and the fitment calls for one per vehicle.

    Specifications

    Fit and size

    • Position: Valve to engine, heater to pipe-1
    • Quantity per vehicle: 1
    • Centerline length: 19.6 in (498 mm)
    • End 1 inside diameter: 0.59 in (15 mm)
    • End 2 inside diameter: 0.59 in (15 mm)

    Build and materials

    • Type: Molded
    • Material: EPDM
    • Reinforcement: Synthetic fiber knit
    • Standard: SAE 20R3 Type EC Class D-1 and D-2
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Not for fuel or oil transfer applications.

    Interchange: 16256M · 4595720AB · 87881 · D87881 · 15755535 · 22769192 · 25760951 · 64336 · 11082 · 8724535660

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    16256M, 19082, 4595720AB, 87881, D87881, 15755535, 22769192, 25760951, 64336, 11082, 8724535660

    Frequently Asked Questions

    Does the Gates 19082 heater hose fit the 2003-2014 GMC Savana 3500 V8 6.0L?

    Yes. Gates 19082 fits the 2003-2014 GMC Savana 3500 V8 6.0L, with one hose per vehicle. If your car is not named here, look it up in the "Vehicles it fits" section.

    Is this Gates heater hose okay for fuel or oil lines?

    No. Gates 19082 is made for coolant, water and air applications, and it is not for fuel or oil transfer.

    What are the inside diameter and length of this heater hose?

    Both ends have a 15 mm (0.59 in) inside diameter, and the centerline length is 498 mm (19.6 in).

    How can I check a heater hose for wear?

    With the engine off and cool, look for cracks, swelling, soft spots or coolant residue on the hose. A shop can pressure-test the cooling system if you want to confirm a leak.

    Should I replace the hose clamps when I install this heater hose?

    Yes. Replace the hose clamps whenever a new coolant hose goes on.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review