Gates 26217 intercooler hose kit for the 2004-2010 Ford E-350 Super Duty V8 6.0L and other vehicles replaces the molded hose that links the intercooler and its pipe. It is a molded turbocharger hose kit developed to fix problems with original equipment manufacturer replacement hoses.
- Silicone cover with extreme temperature resistance for hot under-hood conditions
- Multiple layers of reinforcement for longer service life
- Specially formulated oil-resistant Fluorelastomer liner that prevents damage
- T-bolt clamps with a stainless steel band and bridge that resist corrosion and give higher torque for sealing
Quick facts
- Part: Gates 26217 intercooler hose kit
- Fits: 2004-2010 Ford E-350 Super Duty V8 6.0L and other vehicles
- Position: pipe to intercooler (hot side), intercooler to pipe (cold side)
- Condition: New
Cracks, swelling or an oily film on the hose (checked with the engine off and cool), a hiss under load or low boost can point to a leaking hose. Those signs alone do not prove this hose is the problem; a leaking connection elsewhere in the intake plumbing is another common cause.
Fits
The 2004-2010 Ford E-350 Super Duty V8 6.0L, the 2004-2010 Ford E-450 Super Duty V8 6.0L and the 2008-2010 Ford F-250 Super Duty V8 6.4L are among the vehicles this intercooler hose kit fits.
Specifications
Fit and size
- Position: pipe to intercooler (hot side), intercooler to pipe (cold side)
- Quantity per application: 1
- Centerline length: 5.5 in (140 mm)
- End 1 inside diameter: 3 in (76 mm)
- End 2 inside diameter: 3.3 in (84 mm)
- Minimum clamping length: 3.13 in (79.5 mm) and 3.25 in (82.5 mm)
- Maximum clamping length: 3.44 in (87.4 mm) and 3.56 in (90.4 mm)
- Clamp band width: 0.75 in (19.1 mm)
Build and materials
- Cover: silicone
- Liner: oil-resistant Fluorelastomer
- Clamps: T-bolt, stainless steel band and bridge
- Grade type: OE Improved
- Condition: New
- Country of origin: India
In the box
One intercooler hose and two T-bolt clamps. This listing is one kit, and the application calls for one kit.
Installation notes
- Recommended clamp torque is 75 pounds per inch.
- The clamps use a .25 in. - 28 T-bolt with a .4375 in. hex-head nut with nylon insert.
Interchange: 904-241
4C2Z 6C640 CA · 6C2Z 6C640 DA · 8C3Z 6W651 A · 6C246C640BA · 8C346W651BC · R85128
This part cross-references / interchanges with the following part numbers:
26217, 904-241, 4C2Z 6C640 CA, 6C246C640BA, 6C2Z 6C640 DA, 8C346W651BC, 8C3Z6W651A, 8C3Z 6W651 A, R85128
Frequently Asked Questions
Does the Gates 26217 intercooler hose kit fit a 2004-2010 Ford E-350 Super Duty V8 6.0L?
Yes, Gates 26217 fits the 2004-2010 Ford E-350 Super Duty V8 6.0L. If your vehicle is a different one, look it up in the "Vehicles it fits" section on this page.
Is the Gates intercooler hose sold with clamps?
Yes, Gates 26217 comes with one intercooler hose and two T-bolt clamps that have a stainless steel band and bridge, and the listing is one kit.
What are the inside diameters of this intercooler hose?
One end measures 3 in (76 mm) inside and the other end 3.3 in (84 mm). The centerline length is 5.5 in (140 mm).
What is the liner of this hose made of?
The liner is a specially formulated oil-resistant Fluorelastomer. The hose also has a silicone cover and multiple layers of reinforcement.
What torque do the T-bolt clamps need?
The recommended torque is 75 pounds per inch. The clamps use a .25 in. - 28 T-bolt with a .4375 in. hex-head nut with nylon insert.
