Intercooler Hose Kit for 2004-2007 Ford F-250 Super Duty & More - Gates 26222

$108.99

Vehicles this part fits

    Part number: 26222
    UPC: 770075601715
    Condition: New
    Weight: 1.15 LBS
    Item Package Quantity: 1
    $108.99
    Adding to cart… The item has been added

    Have questions?

    Gates Intercooler Hose Kit P/N:26222
    Gates Intercooler Hose Kit P/N:26222
    $108.99
    $108.99

    Gates 26222 intercooler hose kit for the 2004-2007 Ford F-250 Super Duty V8 6.0L and other vehicles connects the turbocharger to the pipe on the hot side. This OE Improved grade kit addresses issues seen with original equipment replacement hoses and lets you replace the whole hose system at once.

    • Silicone cover resists extreme temperatures in high-temperature under-hood conditions
    • Multiple layers of reinforcement for longer service life
    • Oil-resistant fluoroelastomer liner prevents damage
    • T-bolt clamps with a stainless steel band and bridge resist corrosion and give higher torque for sealing

    Quick facts

    • Part: Gates 26222 intercooler hose kit
    • Fits: 2004-2007 Ford F-250 Super Duty V8 6.0L and other vehicles
    • Position: Turbocharger to pipe (hot side)
    • Condition: New

    A split or oil-soaked hose, or a drop in boost, can mean this hose has worn out, though a leaking pipe connection or a failing turbocharger can be behind the same symptoms, so pin down the cause before you buy a hose.

    Fits

    The kit is listed for a wide range of Ford models, led by the 2004-2007 Ford F-250 Super Duty V8 6.0L, the 2004-2007 Ford F-350 Super Duty V8 6.0L and the 2004-2007 Ford F-450 Super Duty V8 6.0L, and each takes one.

    Specifications

    Fit and size

    • Position: Turbocharger to pipe (hot side)
    • Quantity per vehicle: 1
    • Centerline length: 135 mm (5.3125 in)
    • End 1 inside diameter: 64 mm (2.5 in)
    • End 2 inside diameter: 64 mm (2.5 in)
    • Clamping length: 66.8-74.7 mm (2.63-2.94 in)
    • Clamp band width: 19.1 mm (.75 in)

    Build and materials

    • Type: Molded turbocharger hose kit
    • Grade: OE Improved
    • Bolt type: .25 in. - 28 T-bolt
    • Nut type: .4375 in. hex-head with nylon insert
    • Condition: New
    • Country of origin: India

    In the box

    One intercooler hose and two T-bolt clamps.

    Installation notes

    • Recommended torque: 75 pounds per inch.

    Interchange: 904-400
    5C3Z 6C640 BA · 6C34 6C640 AA · 6C3Z 6C640 A · TIH2

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    26222, 904-400, 5C3Z 6C640 BA, 6C34 6C640 AA, 6C3Z 6C640 A, TIH2

    Frequently Asked Questions

    Will the Gates 26222 fit a 2004-2007 Ford F-250 Super Duty V8 6.0L?

    Yes. Gates 26222 is listed for the 2004-2007 Ford F-250 Super Duty V8 6.0L and for many other Ford models. Check your own truck in the "Vehicles it fits" section.

    Does this Gates intercooler hose kit include clamps?

    Yes. Gates 26222 comes with one hose and two T-bolt clamps. The clamp nuts are .4375 in. hex-head with a nylon insert.

    What inside diameter does this hose have?

    Both ends of this hose measure 64 mm (2.5 in) inside diameter, and the centerline length is 135 mm (5.3125 in).

    How can I tell if this hose is worn?

    With the engine off and cool, look for cracks, soft spots or oil soaking on the hose. If power drops, a shop can test for boost leaks.

    What is the recommended torque for this hose kit?

    The recommended torque listed for this kit is 75 pounds per inch. The kit's clamps are .25 in. - 28 T-bolt clamps.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review