Intercooler Hose Kit for 2006-2010 Chevrolet Silverado 2500 HD & More - Gates 26263

$116.99

Part number: 26263

UPC: 770075621126

Condition: New

Weight: 0.76 LBS

Item Package Quantity: 1

$116.99

Current Stock: 131

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Gates Intercooler Hose Kit P/N:26263

$116.99

Description

Gates 26263 intercooler hose kit for the 2006-2010 Chevrolet Silverado 2500 HD V8 6.6L and other vehicles carries charge air on the cold side, from the intercooler to the engine. The molded kit gives you the hose and clamps to replace that section of the turbocharger hose system.

Silicone cover resists the extreme temperatures under the hood
Multiple layers of reinforcement for a longer service life
Oil-resistant Fluorelastomer liner prevents damage
T-bolt clamps with a stainless steel band and bridge resist corrosion and give higher torque for a tight seal

Quick facts

Part: Gates 26263 intercooler hose kit
Fits: 2006-2010 Chevrolet Silverado 2500 HD V8 6.6L and other vehicles
Position: Intercooler to engine (cold side)
Condition: New

A cracked or swollen hose, or a drop in boost, can mean the cold-side hose is wearing out, though boost loss has other causes too. Before replacing anything, look the hose and clamps over by eye with the engine off and cool; if a failed hose is the cause, this kit replaces it.

Fits

The 2006-2010 Chevrolet Silverado 2500 HD V8 6.6L, the 2007-2010 Chevrolet Silverado 3500 HD V8 6.6L and the 2006-2010 GMC Sierra 2500 HD V8 6.6L are among the trucks this kit fits. If yours is a different model, find its year and engine in the "Vehicles it fits" section.

Specifications

Fit and size

Position: Intercooler to engine (cold side)
Quantity per vehicle: 1
Centerline length: 5.25 in (133 mm)
End 1 inside diameter: 3.25 in (83 mm)
End 2 inside diameter: 3.25 in (83 mm)
Clamping length: 3.13-3.44 in (79.4-87.3 mm)
Clamp band width: 0.75 in (19.1 mm)

Build and materials

Cover: silicone, with Fluorelastomer liner
Clamps: 2 T-bolt clamps, stainless steel band and bridge
Bolt type: .25 in. - 28 T-Bolt
Nut type: .4375 in. hex-head with nylon insert
Grade type: OE Improved
Condition: New
Country of origin: Vietnam

In the box

One turbocharger hose and two T-bolt clamps. This listing is one kit, and the vehicle takes one.

Installation notes

Recommended clamp torque is 75 pounds per inch.

Interchange: 15102148

Product information is for general reference and may contain errors. See our Disclaimer.

Manufacturer's description

Product specs

Vehicles it fits

Interchange numbers

This part cross-references / interchanges with the following part numbers:

26263, 15102148

Buyer's Q&A

Frequently Asked Questions

Does the Gates 26263 intercooler hose kit fit the 2006-2010 Chevrolet Silverado 2500 HD V8 6.6L?

Yes. Gates 26263 fits the 2006-2010 Chevrolet Silverado 2500 HD V8 6.6L, and the "Vehicles it fits" section covers the other years and models.

Does this Gates intercooler hose come with clamps?

Yes. Gates 26263 includes one turbocharger hose and two T-bolt clamps with a stainless steel band and bridge.

What size are the ends on this intercooler hose kit?

Both ends have an 83 mm (3.25 in) inside diameter. The centerline length of the hose is 133 mm (5.25 in).

How can I check a cold-side intercooler hose kit for wear?

With the engine off and cool, look for cracks, swelling or a hose that has worked loose at the clamps. Boost loss can have other causes, so a shop can pressure-test the system.

What torque do the T-bolt clamps on this kit call for?

The recommended torque is 75 pounds per inch. The clamps use a .25 in. - 28 T-bolt with a nylon-insert nut.

Reviews

No reviews yet — be the first to review this product.

Write a Review

Intercooler Hose Kit for 2006-2010 Chevrolet Silverado 2500 HD & More - Gates 26263