Intercooler Hose Kit for 2004-2010 Ford E-350 Super Duty & More - Gates 26279

$195.99

Part number: 26279

UPC: 770075633518

Condition: New

Weight: 1.03 LBS

Item Package Quantity: 1

$195.99

Current Stock: 62

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Gates Intercooler Hose Kit P/N:26279

$195.99

Description

Gates 26279 intercooler hose kit for the 2004-2010 Ford E-350 Super Duty V8 6.0L and other vehicles replaces the molded hose on the hot-side pipe to the intercooler. It is a molded turbocharger hose kit, so the hose and its clamps are replaced together.

Silicone cover for extreme temperature resistance in high-temperature under-hood conditions
Multiple layers of reinforcement for longer service life
Specially formulated oil-resistant Fluorelastomer liner
T-bolt clamps with stainless steel band and bridge resist corrosion and give higher torque for sealing

Quick facts

Part: Gates 26279 intercooler hose kit
Fits: 2004-2010 Ford E-350 Super Duty V8 6.0L and other vehicles
Position: Pipe to intercooler (hot side)
Condition: New

A hose that is cracked, swollen, oil-soaked or weeping at a clamp can mean it has reached the end of its life, though a loss of boost can have other causes too. With the engine off and cool, look over the hose and clamps for those marks, and find the cause before replacing anything.

Fits

The vehicles it fits include the 2004-2010 Ford E-450 Super Duty V8 6.0L and the 2004-2010 Starcraft Bus Starlite V8 6.0L. One kit goes on the hot-side pipe to the intercooler. If your vehicle is not named here, look it up in the "Vehicles it fits" section to see whether it is covered.

Specifications

Fit and size

Position: pipe to intercooler (hot side)
Quantity per vehicle: 1
Centerline length: 11.75 in (298 mm)
Inside diameter, both ends: 2.5 in (64 mm)
Clamping length: 2.63-2.94 in (66.7-74.6 mm)
Clamp band width: 0.75 in (19.1 mm)

Build and materials

Grade type: OE Improved
Cover: silicone, with Fluorelastomer liner
Clamps: T-bolt, stainless steel band and bridge
Clamp hardware: .25 in. - 28 T-bolt, .4375 in. hex-head nut with nylon insert
Condition: New
Country of origin: Viet Nam

In the box

One molded hose and two T-bolt clamps.

Installation notes

Recommended clamp torque: 75 pounds per inch.

Interchange: 4C2Z 6C640 EA · 6C2Z 6C640 A · 6C2Z 6C640 EA
4C2Z6C640AA · 4C2Z6C640DA · 6C2Z6C640BA

Manufacturer's description

Product specs

Vehicles it fits

Interchange numbers

This part cross-references / interchanges with the following part numbers:

26279, 4C2Z6C640AA, 4C2Z6C640DA, 4C2Z 6C640 EA, 6C2Z 6C640 A, 6C2Z6C640BA, 6C2Z 6C640 EA

Buyer's Q&A

Frequently Asked Questions

Will the Gates 26279 kit fit the 2004-2010 Ford E-450 Super Duty V8 6.0L?

Yes. Gates 26279 is listed for the 2004-2010 Ford E-450 Super Duty V8 6.0L, on the pipe to the intercooler (hot side). For another vehicle, look it up in the "Vehicles it fits" section.

Does this Gates intercooler hose kit come with clamps?

Yes. Gates 26279 includes one molded hose and two T-bolt clamps.

What inside diameter and length does this hose kit have?

The inside diameter is 2.5 in (64 mm) at both ends, and the centerline length is 11.75 in (298 mm).

Are the T-bolt clamps in this kit stainless steel?

Yes. The clamps have a stainless steel band and bridge that resist corrosion. They cover a clamping length of 2.63-2.94 in (66.7-74.6 mm).

What torque do the clamps on this hose kit need?

The recommended torque is 75 pounds per inch. The hardware is a .25 in. - 28 T-bolt with a .4375 in. hex-head nut with a nylon insert.

Reviews

No reviews yet — be the first to review this product.

Write a Review

Intercooler Hose Kit for 2004-2010 Ford E-350 Super Duty & More - Gates 26279