Gates Radiator Cap P/N:31511
Gates 31518 cooling system components for the 2011-2024 Ram 1500 5.7L and other vehicles is a safety release radiator cap that seals the cooling system and holds its pressure.
A cap that no longer holds pressure can show up as coolant loss, boil-over or overheating. Those signs alone do not prove the cap is at fault, since a weeping hose can produce them too.
The 2011-2019 Ram 2500 5.7L and the 2015-2017 Jeep Wrangler 3.6L are among the many vehicles this cap fits, at one cap per vehicle.
Fit and size
Build and materials
Interchange: ST-16 · 703-1462 · 703-1701
644130 · 33062 · 10330 · 11330 · 46063 · 70330BL · 70330RD
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Gates 31518 radiator cap fit the 2011-2024 Ram 1500 5.7L?
Yes, Gates 31518 fits the 2011-2024 Ram 1500 5.7L, one cap per vehicle. It fits many other vehicles too, so check your own car in the "Vehicles it fits" section.
Will this cap work on a 2015-2017 Jeep Wrangler 3.6L?
Yes, Gates 31518 is listed for the 2015-2017 Jeep Wrangler 3.6L, and the vehicle takes one cap.
What pressure rating does this Gates safety release cap have?
This cap is rated 16 psi. It covers a wide range of pressures, 14-18 psi.
Can this radiator cap be used without a coolant recovery system?
Yes, this cap can be used on applications with or without a coolant recovery system.
What are the filler neck measurements for this cap?
The filler neck is 1.61 in (41 mm) inside diameter, 2.13 in (54 mm) outside diameter and .75 in (19 mm) deep. The cap uses a cam-on attachment.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.