Radiator Coolant Hose for 1986-1989 Ford Taurus & More - Gates 20753

Gates 20753 radiator coolant hose for the 1986-1989 Ford Taurus V6 3.0L and other vehicles carries engine coolant through the cooling system. This molded radiator coolant hose is listed for upper and lower positions.

• Specifically engineered materials resist collapse under vacuum
• Engineered to resist electrochemical degradation, the leading cause of hose failure
• Pre-shaped to fit and to ensure perfectly sealed connections
• EPDM tube, synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover
• Meets SAE 20R4 class D2 and DIN 73411 class A requirements, except for tolerances
• Temperature range of -40 °F to +257 °F (-40 °C to +125 °C)

Quick facts

• Part: Gates 20753 radiator coolant hose
• Fits: 1986-1989 Ford Taurus V6 3.0L and other vehicles
• Position: Upper, lower
• Material: EPDM
• Condition: New

Cracks, bulges, soft spots or coolant seepage at the hose ends can mean a coolant hose is worn, and you should look only with the engine off and cool. A leaking radiator, a loose clamp, a water pump or a thermostat housing can be behind coolant loss or overheating too, so find the cause before buying.

Fits

The 1986-1995 Mercury Sable V6 3.0L, the 1971-1974 Vam Classic 6-cylinder 3.8L and the 1972-1974 Classic 6-cylinder 4.2L fit this hose, along with many other vehicles, at one hose per vehicle.

Specifications

Installation notes

• Hose clamps should be replaced each time a new coolant hose is installed.
• Not for fuel or oil transfer applications.

Product information is for general reference and may contain errors. See our Disclaimer.