Gates 20922 lower radiator coolant hose for the 1987-1989 Alfa Romeo Milano V6 2.5L or 3.0L and other vehicles carries coolant along the lower run from the engine to the pipe.
- Specially engineered materials that resist collapse under vacuum
- Built to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped molded form made to fit and to seal at the connections
- EPDM tube, synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature range of -40°F to +257°F (-40°C to +125°C)
Quick facts
- Part: Gates 20922 radiator coolant hose
- Fits: 1987-1989 Alfa Romeo Milano V6 2.5L or 3.0L and other vehicles
- Position: Lower, engine to pipe
- Material: EPDM
- Condition: New
A worn or failing radiator coolant hose can show up as coolant drips, a cracked hose or a hose that collapses. Before you replace the hose, rule out a loose clamp or a weeping pipe connection, since the drip may start there. With the engine off and cool, look the hose over for cracks and wet spots.
Fits
It fits the 1987-1989 Alfa Romeo Milano V6 2.5L or 3.0L and the 1975-1978 Ford Mustang II V8 5.0L.
Specifications
Fit and size
- Position: Lower, engine to pipe
- Quantity per vehicle: 1
- Centerline length: 16.1 in (409 mm)
- End 1 inside diameter: 1.5 in (38 mm)
- End 2 inside diameter: 1.88 in (48 mm)
Build and materials
- Construction: Molded, no internal spring
- Material: EPDM
- Condition: New
- Country of origin: United States
In the box
One radiator coolant hose. Each vehicle takes one.
Installation notes
- Replace the hose clamps each time a new radiator coolant hose is installed.
- Do not use for fuel or oil transfer applications.
Interchange: MH-925 · KM-792
D52Z 8286 A · D5ZE 8B273 AB · D5ZZ 8286 A · 3405010482 · 22089M · MH435 · 70857 · 857 · D70857 · MR132 · 217 · 60925 · 7647 · C0922
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
3405010482, 22089M, MH-925, MH435, 20922, 70857, 857, D70857, MR132, D52Z 8286 A, D5ZE 8B273 AB, D5ZZ 8286 A, 217, 60925, KM-792, 7647, C0922
Frequently Asked Questions
Is this Gates lower radiator hose right for the 1975-1978 Ford Mustang II V8 5.0L?
Yes. Gates 20922 fits the 1975-1978 Ford Mustang II V8 5.0L. It also fits the 1987-1989 Alfa Romeo Milano V6 2.5L or 3.0L.
What is the Gates molded coolant hose made of?
On Gates 20922 the tube is EPDM, the reinforcement is synthetic fiber knit, and the cover is EPDM that resists heat, ozone and chemical coolants.
What size are the ends on this Gates radiator coolant hose?
End 1 has a 1.5 in (38 mm) inside diameter and end 2 has a 1.88 in (48 mm) inside diameter. The centerline length is 16.1 in (409 mm).
What temperatures can this Gates coolant hose handle?
The range is -40°F to +257°F (-40°C to +125°C). Do not use this radiator coolant hose for fuel or oil transfer.
Do I need new clamps when I install this radiator coolant hose?
Yes. Replacing the hose clamps each time a new coolant hose is installed is recommended. The Gates 20922 listing is one hose.
