Gates 21235 lower radiator coolant hose for the 1990-1994 Mitsubishi Mighty Max V6 3.0L and other vehicles carries coolant between the radiator and the engine. This Gates radiator coolant hose is a molded part with an EPDM body.
Coolant seepage at the hose ends, cracks, a soft or swollen section when the engine is cool, or a collapsed hose can mean the hose is wearing out. A leaking radiator, a loose clamp or a failing water pump can be behind coolant loss too, so find the cause before you buy. The lower position takes one hose.
It is listed for a wide range of Mitsubishi, Dodge and Triumph models, led by the 1989-1994 Mitsubishi Montero V6 3.0L and the 1990-1991 Dodge Ram 50 V6 3.0L. Open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
Interchange: MH-4235 · 142-3532 · 14-1853-2 · U34-6039 · KM-2128 · 54-02027
24119L · GRH524 · 62078 · 70950 · 950 · E70950 · MB538804 · MB605027 · 7946
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this Gates lower radiator hose the right one for the 1989-1994 Mitsubishi Montero V6 3.0L?
Yes. Gates 21235 is listed for the 1989-1994 Mitsubishi Montero V6 3.0L in the lower position, which takes one hose. Check other models in the "Vehicles it fits" section.
What are the inside diameter and length of this Gates molded coolant hose?
Gates 21235 has a 1.25 in (32 mm) inside diameter at both ends. Its centerline length is 27.8 in (706 mm).
Is this Gates coolant hose reinforced?
Yes. The EPDM tube has synthetic fiber knit reinforcement and an EPDM cover that resists heat, ozone and chemical coolant. The materials are also made to resist collapse under vacuum.
Do I need new clamps when I fit this radiator coolant hose?
Yes, new hose clamps are recommended whenever a coolant hose is replaced. This hose is meant for coolant only, not for fuel or oil transfer.
Does this lower hose meet SAE 20R4?
Yes. Gates 21235 meets SAE 20R4 class D2 and DIN 73411 class A, except for tolerances. It handles -40 °F to +257 °F (-40 °C to +125 °C).
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
