Gates Radiator Coolant Hose P/N:21997

Be the first to review this product

$29.99

MPN: 21997

Item Package Quantity: 1

Current Stock:

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Gates Radiator Coolant Hose P/N:21997

$29.99

Description

Keep coolant moving between the radiator and engine on your minivan with the Gates Molded Coolant Hose 21997, a pre-shaped lower radiator hose that drops in as a direct-fit replacement for the 1993-1995 Dodge Caravan (L4-2.5L) and 1993-1995 Plymouth Voyager (L4-2.5L). Its molded curves match the routing so it seats without kinking or trimming.

EPDM construction: EPDM tube with synthetic fiber knit reinforcement and a heat-, ozone- and chemical-coolant-resistant EPDM cover.
Collapse-resistant: specifically-engineered materials resist collapse under vacuum for steady coolant flow.
Built to last: engineered to resist electrochemical degradation, a leading cause of hose failure.
Rated for service: handles a temperature range of -40°F to +257°F (-40°C to +125°C) and meets the requirements of SAE 20R4 class D2 and DIN 73411 class A (except for tolerances).

The hose measures 15.9 in (404 mm) centerline length with 1.5 in (38 mm) inside diameters at both ends. Gates recommends installing new hose clamps whenever a coolant hose is replaced. Do not use for fuel or oil transfer applications. Country of origin: United States.

Interchange: KM-3135
KM3135 · 20267S · 4546532 · 4582479 · 4682479 · 4682482 · 71648 · B71648 · 62037 · 989 · 8687

Manufacturer's Description

Product Specs

Buyer's Guide

Interchange Part Numbers

This part cross-references / interchanges with the following part numbers:

20267S, 21997, 4546532, 4582479, 4682479, 4682482, 71648, B71648, 62037, 989, KM-3135, 8687

Frequently Asked Questions

What vehicles does the Gates 21997 hose fit?

It is a direct-fit replacement for the 1993-1995 Dodge Caravan and 1993-1995 Plymouth Voyager with the L4-2.5L engine. Check the Buyer's Guide tab to confirm your vehicle.

Where does this hose install?

It is the lower radiator coolant hose, routing coolant between the radiator and engine. Its molded shape matches the factory routing for a proper fit.

What is the hose made of?

It uses an EPDM tube with synthetic fiber knit reinforcement and an EPDM cover that resists heat, ozone and chemical coolants.

What are the dimensions of this hose?

It has a 15.9 in (404 mm) centerline length with a 1.5 in (38 mm) inside diameter at each end.

Should I replace the hose clamps too?

Yes. Gates recommends installing new hose clamps each time a coolant hose is replaced to help ensure a proper seal.