Gates Radiator Coolant Hose P/N:22462

Be the first to review this product

$36.99

MPN: 22462

Item Package Quantity: 1

Current Stock:

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Gates Radiator Coolant Hose P/N:22462

$36.99

Description

Keep coolant flowing and hold back leaks with the Gates Radiator Coolant Hose (MPN 22462), a premium molded lower coolant hose that drops in as a direct-fit replacement for the 1999-2003 Lexus RX300 (V6-3.0L), the 2001-2003 Toyota Highlander (V6-3.0L), and the 2004-2007 Toyota Highlander (V6-3.3L). It's pre-shaped to route between the engine and radiator and seal at each connection without trimming or forcing.

EPDM construction: EPDM tube, synthetic fiber knit reinforcement, and a heat-, ozone-, and chemical-coolant-resistant EPDM cover.
Collapse resistant: specifically-engineered materials resist collapse under vacuum.
Electrochemical resistance: engineered to resist electrochemical degradation, the leading cause of hose failure.
Rated to spec: meets the requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances), with a temperature range of -40°F to +257°F (-40°C to +125°C).

Gates recommends replacing the hose clamps each time a new coolant hose is installed. Do not use for fuel or oil transfer applications. Country of origin: United States.

Interchange: 22392M · 72005 · E72005 · 62751 · 9095 · 1657220030 · 1657220060 · 1657220070. Manufacturer part number 22462.

Manufacturer's Description

Product Specs

Buyer's Guide

Interchange Part Numbers

This part cross-references / interchanges with the following part numbers:

22392M, 22462, 72005, E72005, 62751, 9095, 1657220030, 1657220060, 1657220070

Frequently Asked Questions

What vehicles does this hose fit?

It's a direct-fit replacement for the 1999-2003 Lexus RX300 (V6-3.0L), 2001-2003 Toyota Highlander (V6-3.0L), and 2004-2007 Toyota Highlander (V6-3.3L). See the Buyer's Guide tab to confirm your vehicle.

What is this hose made of?

It has an EPDM tube, synthetic fiber knit reinforcement, and a heat-, ozone-, and chemical-coolant-resistant EPDM cover.

Will it collapse under vacuum?

No. Its specifically-engineered materials are designed to resist collapse under vacuum, and it's built to resist electrochemical degradation, the leading cause of hose failure.

Do I need new clamps when I install it?

Gates recommends replacing the hose clamps each time a new coolant hose is installed, so plan to fit fresh clamps when you put on the new hose.

Can this hose be used for fuel or oil?

No. This is a coolant hose only. Do not use it for fuel or oil transfer applications.