Gates Radiator Coolant Hose P/N:24262
Gates 22927 lower radiator coolant hose for the 2007 Chevrolet Silverado 2500 HD Classic V8 8.1L and other vehicles carries engine coolant through a molded modular assembly. This Gates radiator coolant hose is made for specific applications.
A coolant hose that leaks, cracks, bulges or feels soft may be due for replacement, but a clamp, a connector or another cooling part can leak too, so work out where the problem starts before buying. With the engine off and cool, look the hose and quick connector over for wet spots, cracks or swelling.
The 2007 Chevrolet Silverado 2500 HD Classic V8 8.1L, the 2007 Chevrolet Silverado 3500 Classic V8 8.1L and the 2007 GMC Sierra 2500 HD Classic V8 8.1L are all direct-fit applications, and many other vehicles are covered too. The 2007 Chevrolet Silverado 3500 Classic V8 8.1L takes one hose. If your vehicle is not named here, look up your own year and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
One radiator coolant hose with 2 branches and a female quick connector.
Interchange: 26492X · E90777 · 15098624 · 15168745 · 15792830 · 15792831 · 62988 · 9562
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does this Gates lower radiator hose fit the 2007 GMC Sierra 2500 HD Classic V8 8.1L?
Yes, Gates 22927 is listed for the 2007 GMC Sierra 2500 HD Classic V8 8.1L, which takes one. If your vehicle is different, look up its year and engine in the "Vehicles it fits" section.
What is this Gates molded coolant hose made of?
Gates 22927 is made of EPDM, plastic and steel. The tube is EPDM with synthetic fiber knit reinforcement, under a heat-, ozone- and chemical coolant-resistant EPDM cover.
Is the quick connector included with this modular hose?
Yes. This hose is a modular assembly that includes a female quick connector and 2 branches.
What can a leaking or collapsing lower coolant hose look like?
Wet spots or drips at the hose, cracks or bulges in the cover, and a soft or collapsed hose can all mean a worn hose. A shop can test the cooling system if you are unsure.
Do I need new clamps with this Gates coolant hose?
Yes. Put in new clamps whenever a new coolant hose such as Gates 22927 goes on. This hose is also not meant for fuel or oil transfer.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.