Lower Radiator Coolant Hose for 1998-2001 Volkswagen Passat & More - Gates 23091

$128.99

Vehicles this part fits

    Part number: 23091
    UPC: 770075233954
    Condition: New
    Weight: 0.97 LBS
    Item Package Quantity: 1
    $128.99
    Adding to cart… The item has been added

    Have questions?

    Gates Radiator Coolant Hose P/N:23091
    Gates Radiator Coolant Hose P/N:23091
    $128.99
    $128.99

    Gates 23091 lower radiator coolant hose for the 1998-2001 Volkswagen Passat V6 2.8L and other vehicles carries coolant between the radiator and the engine. The Gates radiator coolant hose is a molded modular assembly, made for specific applications.

    • Modular hose with an integrated female quick connector and sensor port
    • Specifically engineered materials resist collapse under vacuum
    • Resists electrochemical degradation, a leading cause of hose failure
    • EPDM tube with synthetic fiber knit reinforcement and an EPDM cover resistant to heat, ozone and chemical coolants
    • Meets SAE 20R3 EC Class D1 under 25 mm (1 in.) ID and SAE 20R4 EC Class D1 at 25 mm (1 in.) ID and over
    • Temperature range of -40°F to +257°F (-40°C to +125°C)

    Quick facts

    • Part: Gates 23091 radiator coolant hose
    • Fits: the 1998-2001 Volkswagen Passat V6 2.8L and other vehicles
    • Position: Lower
    • Material: EPDM, Plastic, Steel
    • Condition: New

    A thermostat, radiator cap or water pump can be behind overheating or coolant loss as well, so find the cause before you buy a hose. With the engine off and cool, a cracked, swollen, soft or collapsed hose, or coolant residue at the ends, can mean the hose is worn.

    Fits

    The hose is listed for a wide range of Audi and Volkswagen models, led by the 1998-2001 Audi A6 Quattro V6 2.8L and the 2000-2004 A6 Quattro V6 2.7L, and the 2000-2002 Audi S4 V6 2.7L. If your car isn't named here, look up its years and engine in the "Vehicles it fits" section.

    Specifications

    Fit and size

    • Position: Lower
    • Quantity per vehicle: 1
    • Centerline length: 12 in (305 mm)
    • End 1 inside diameter: 1.2 in (30 mm)
    • End 2 inside diameter: 1.2 in (30 mm)
    • End 3 inside diameter: 1.09 in
    • Quick connect fittings: 1

    Build and materials

    • Construction: molded, modular
    • Material: EPDM, plastic, steel
    • Modular components: female quick connector, sensor port
    • Contains spring: No
    • Condition: New
    • Country of origin: Turkey

    In the box

    One radiator coolant hose with a female quick connector and a sensor port. This listing holds one hose, and the vehicle takes one.

    Installation notes

    • Gates recommends replacing the clamps each time a new coolant hose is installed.
    • Do not use this hose for fuel or oil transfer.

    Interchange: 20455S · 67204 · 67206 · 72734 · B72734 · 9756 · R25101 · CHR0142R · 4B0121055C · 8D0121055K · 8D0121055T

    This part cross-references / interchanges with the following part numbers:

    20455S, 23091, 67204, 67206, 72734, B72734, 9756, R25101, CHR0142R, 4B0121055C, 8D0121055K, 8D0121055T

    Frequently Asked Questions

    Does the Gates lower radiator hose fit the 1998-2001 Volkswagen Passat V6 2.8L?

    Yes. Gates 23091 is listed for the 1998-2001 Volkswagen Passat V6 2.8L as a lower hose. The "Vehicles it fits" section shows the other years and engines.

    Does the Gates molded coolant hose include a quick connector and sensor port?

    Yes. This listing is one hose with a female quick connector and a sensor port built in, and the vehicle takes one.

    What temperature range does the Gates coolant hose handle?

    Gates 23091 is rated from -40°F to +257°F (-40°C to +125°C). Its EPDM cover resists heat, ozone and chemical coolants.

    What are the signs a lower radiator coolant hose is wearing out?

    With the engine off and cool, look for cracks, swelling, a soft or collapsed hose, or coolant residue at the ends. A shop can pressure-test the cooling system.

    Can I reuse the old clamps on this new radiator coolant hose?

    Gates recommends replacing the clamps each time a new coolant hose is installed, so plan on new clamps for Gates 23091.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review