Keep coolant flowing and hold a leak-free seal with the Gates Radiator Coolant Hose 23995, a premium molded upper coolant hose that drops in as a direct-fit replacement for 2008-2010 HINO 238, 258, 258ALP, 258LP, 268, 268A, 338, 338CT and 358 trucks, the 2008 HINO 308, and the Canada-market MEDIUM/HEAVY TRUCKS HINO 308, 338 and 358 — all with the L6-7.7L engine. See the Buyer's Guide tab for the full application list.
Caution: do not use for fuel or oil transfer applications. Country of origin: United States.
Interchange: 20600S · F11449 · 16571E0140 · 16654 · Manufacturer part number 23995.
This part cross-references / interchanges with the following part numbers:
What vehicles does the Gates 23995 fit?
It is a direct-fit replacement for 2008-2010 HINO 238, 258, 258ALP, 258LP, 268, 268A, 338, 338CT and 358, the 2008 HINO 308, and Canada-market HINO 308/338/358 with the L6-7.7L engine. See the Buyer's Guide tab.
What is this hose made of?
It uses an EPDM tube, synthetic fiber knit reinforcement, and a heat-, ozone- and chemical-coolant-resistant EPDM cover.
What standards does it meet?
It meets the requirements of SAE 20R4 class D2 and DIN 73411 class A (except for tolerances), with a temperature range of -40°F to +257°F (-40°C to +125°C).
Should I replace the clamps when installing it?
Gates recommends replacing the hose clamps each time a new coolant hose is installed.
Can this hose be used for fuel or oil lines?
No. Per Gates, do not use it for fuel or oil transfer applications; it is designed for coolant use.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
