Gates 24412 lower radiator coolant hose for the 2013-2016 Ford F-350 V8 6.2L and other vehicles carries coolant from the radiator to the connector. This Gates radiator coolant hose is manufactured to fit specific applications.
- Modular molded assembly with two female quick connectors
- Specifically-engineered materials resist collapse under vacuum
- Hose engineered to resist electrochemical degradation, the leading cause of hose failure
- EPDM tube with synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets SAE 20R3 EC Class D1 under 25 mm (1 in.) ID and SAE 20R4 EC Class D1 for 25 mm (1 in.) ID and over
- Temperature range of -40 °F to +257 °F (-40 °C to +125 °C)
Quick facts
- Part: Gates 24412 radiator coolant hose
- Fits: 2013-2016 Ford F-350 V8 6.2L and other vehicles
- Position: Lower, radiator to connector
- Material: EPDM, plastic, steel
- Condition: New
A hose that is cracked, swollen or weeping coolant at its connections can mean it is due for replacement. A leaking radiator, a worn water pump or a loose clamp can be behind the same coolant loss, so track down the source before you buy a hose.
Fits
This hose is listed for a wide range of Ford F-Series trucks, including the 2011-2016 Ford F-250 Super Duty V8 6.2L and the 2011-2016 Ford F-350 Super Duty V8 6.2L, and each takes one. If your truck is not named here, find its year and engine in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: Lower, radiator to connector
- Quantity per vehicle: 1
- Centerline length: 27.25 in (692 mm)
- End 1 inside diameter: 1.96 in (50 mm)
- End 2 inside diameter: 1.99 in (51 mm)
- Branches: 0
Build and materials
- Construction: molded, modular
- Material: EPDM, plastic, steel
- Modular components: 2 female quick connectors
- Condition: New
- Country of origin: United States
In the box
One radiator coolant hose with two female quick connectors.
Installation notes
- Replace the clamps each time a new coolant hose is installed.
- Not for fuel or oil transfer applications.
Interchange: BC34 8286 AC · BC3Z 8286 A · BC3Z 8286 J
27197X · 73049 · E73049 · F10270 · KM5036 · KM5108 · 17078
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
27197X, 73049, E73049, F10270, BC34 8286 AC, BC3Z 8286 A, BC3Z 8286 J, KM5036, KM5108, 17078
Frequently Asked Questions
Does the Gates 24412 radiator coolant hose fit a 2011-2016 Ford F-250 Super Duty V8 6.2L?
Yes. Gates 24412 is listed for the 2011-2016 Ford F-250 Super Duty V8 6.2L, and the truck takes one lower hose.
What comes with this Gates coolant hose?
The listing is one radiator coolant hose with its two female quick connectors included in the assembly.
What size is the Gates molded coolant hose 24412?
This Gates 24412 is a molded hose, 27.25 in (692 mm) along the centerline, with a 50 mm (1.96 in) inside diameter at end 1 and 51 mm (1.99 in) at end 2.
What can I check by eye on a Gates lower radiator hose?
With the engine off and cool, look for soft spots, a flattened hose or coolant residue at the connections. A shop can pressure-test the cooling system.
What temperature range can the 24412 coolant hose take?
Gates 24412 has a temperature range of -40 °F to +257 °F (-40 °C to +125 °C). It meets SAE 20R3 EC Class D1 under 25 mm ID and SAE 20R4 EC Class D1 at 25 mm ID and over.
