Gates 24445 lower radiator coolant hose for the 2008-2010 Ford F-250 Super Duty V8 5.4L or V10 6.8L and other vehicles carries coolant between the radiator and the pipe. This Gates coolant hose is a molded modular assembly.
- Two female quick connectors come with the hose
- EPDM tube with synthetic fiber knit reinforcement and an EPDM cover that resists heat, ozone and chemical coolant
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Meets SAE 20R3 EC Class D1 under 25 mm (1 in.) ID and SAE 20R4 EC Class D1 at 25 mm (1 in.) ID and over
- Temperature range of -40 °F to +257 °F (-40 °C to +125 °C)
Quick facts
- Part: Gates 24445 radiator coolant hose
- Fits: 2008-2010 Ford F-250 Super Duty V8 5.4L or V10 6.8L and other vehicles
- Position: Lower - radiator to pipe
- Material: EPDM, plastic, steel
- Condition: New
A lower hose that is cracked, soft, swollen or weeping coolant can mean it is due for replacement, and overheating or a dropping coolant level can go along with it. A leak or low coolant level on its own does not prove this hose is at fault; a worn clamp could be the source instead.
Fits
On the 2008-2010 Ford F-350 Super Duty V8 5.4L or V10 6.8L and the 2008-2010 Ford F-450 Super Duty V10 6.8L, this radiator coolant hose is the lower hose from radiator to pipe, and each truck takes one. If your truck is not named here, look it up by year and engine in the "Vehicles it fits" section on this page.
Specifications
Fit and size
- Position: Lower - radiator to pipe
- Quantity per vehicle: 1
- Centerline length: 690 mm (27.16 in)
- End 1 inside diameter: 53 mm (2.08 in)
- End 2 inside diameter: 53 mm (2.08 in)
- Quick connect fittings: 2
Build and materials
- Construction: molded, modular
- Material: EPDM, plastic, steel
- Modular components: 2 female quick connectors
- Condition: New
- Country of origin: United States
In the box
One radiator coolant hose with two female quick connectors.
Installation notes
- Replace the clamps each time a new coolant hose is installed.
- Do not use this hose for fuel or oil transfer.
Interchange: 8C34 8286 AA · 8C34 8286 AB · 8C34 8286 AC · 8C34 8286 AD · 8C3Z 8286 A
27204X · 72634 · E72634 · 66447 · KM4949 · 17102
This part cross-references / interchanges with the following part numbers:
27204X, 72634, E72634, 8C34 8286 AA, 8C34 8286 AB, 8C34 8286 AC, 8C34 8286 AD, 8C3Z 8286 A, 66447, KM4949, 17102
Frequently Asked Questions
Does this Gates lower radiator hose fit the 2008-2010 Ford F-250 Super Duty V8 5.4L or V10 6.8L?
Yes. Gates 24445 fits the 2008-2010 Ford F-250 Super Duty with the V8 5.4L or V10 6.8L, and each truck takes one. For other trucks, use the "Vehicles it fits" section.
What comes with this Gates molded coolant hose?
Gates 24445 is one molded hose with two female quick connectors included. This listing is a single hose, and each truck takes one.
What are the inside diameter and length of the Gates 24445 radiator coolant hose?
Both ends of the Gates 24445 have a 53 mm (2.08 in) inside diameter, and the centerline length is 690 mm (27.16 in).
How can I tell if a radiator coolant hose with quick connectors is worn out?
With the engine cool, look for cracks, soft or swollen spots, a collapsed section, or coolant seepage at the hose or its quick connectors. A shop can pressure-test the system if the cause is unclear.
What temperatures and fluids can the Gates 24445 hose handle?
The Gates 24445 is rated for -40 °F to +257 °F (-40 °C to +125 °C), and its EPDM cover resists heat, ozone and chemical coolant. It is not for fuel or oil transfer.
