Gates Radiator Coolant Hose P/N:23682
Gates 51380 upper radiator coolant hose for the 1999-2002 Land Rover Discovery V8 4.0L and the 2003-2004 Discovery V8 4.6L carries coolant between the engine and the radiator. This Gates coolant hose is modular: it is built with OEM-exact hose components, here one branch and a drain.
A coolant leak at the hose, a swollen or cracked hose body, or a soft hose that collapses can mean it is worn. With the engine off and cool, look it over for cracks, bulges and wet traces at the ends before replacing it, because other cooling parts can leak too. If this hose is the cause, this one replaces it.
This hose is a direct-fit replacement for the 1999-2002 Land Rover Discovery V8 4.0L and the 2003-2004 Discovery V8 4.6L.
Fit and size
Build and materials
One radiator coolant hose with its branch and drain. This listing is one hose; the 1999-2002 Land Rover Discovery V8 4.0L and the 2003-2004 Discovery V8 4.6L each take one.
Interchange: 27348X · PEH101640 · F11203 · PCH000460 · PCH119030 · PEH000270 · PEH101260 · PEH101270 · PEH101630 · PEH101650 · PZS000020 · PZS100130 · R14110 · CHR0133R · URO006545
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Gates 51380 hose right for the 1999-2002 Land Rover Discovery V8 4.0L?
Yes. Gates 51380 is an upper radiator coolant hose for the 1999-2002 Land Rover Discovery V8 4.0L and the 2003-2004 Discovery V8 4.6L, one per vehicle.
Does this Gates radiator coolant hose have quick connectors?
No. Gates 51380 has no quick-connect fittings; it comes with one branch and a drain built in.
Is this Gates molded coolant hose a modular hose?
Yes. The hose is molded and modular, built with one branch and a drain, and its EPDM tube has synthetic fiber knit reinforcement.
What temperature range does this upper coolant hose handle?
This hose is rated for -40°F to +257°F (-40°C to +125°C). It meets SAE 20R3 EC Class D1 under 25 mm ID and SAE 20R4 EC Class D1 at 25 mm ID and over.
Should I replace the clamps when installing the Gates 51380 coolant hose?
Yes. Fit new clamps with every replacement coolant hose. Keep this hose to coolant, never fuel or oil lines.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.