Gates 51517 upper radiator coolant hose for the 2016-2018 Kia Sorento 4-cylinder 2.0L carries coolant between the engine and the radiator. This Gates coolant hose is a molded EPDM hose for the upper coolant connection.
Signs of a worn upper hose include coolant drips or residue at the ends, a bulging, soft or cracked hose, and a coolant level that keeps dropping. Clamps and other cooling parts can leak too, so look the hose over with the engine off and cool and find the cause first; if the hose is the cause, this part replaces it.
It is a direct-fit replacement for the 2016-2018 Kia Sorento 4-cylinder 2.0L.
Fit and size
Build and materials
One upper radiator coolant hose. The 2016-2018 Kia Sorento 4-cylinder 2.0L takes one.
Interchange: 27389X · F11524 · 25414C5700
This part cross-references / interchanges with the following part numbers:
Will this Gates 51517 hose fit a 2016-2018 Kia Sorento 4-cylinder 2.0L?
Yes. Gates 51517 is an upper radiator coolant hose for the 2016-2018 Kia Sorento 4-cylinder 2.0L, and the vehicle takes one.
Is this Gates radiator coolant hose made of EPDM?
Yes. Gates 51517 has an EPDM tube and an EPDM cover, with synthetic fiber knit reinforcement.
What temperature range does the Gates molded coolant hose handle?
The range is -40 °F to +257 °F (-40 °C to +125 °C).
Should I replace the hose clamps when I install a new upper hose?
Yes. New clamps are recommended each time a new coolant hose is installed, so plan to replace the old ones.
Can I use this coolant hose for fuel or oil lines?
No. This hose is made for coolant only and must not be used for fuel or oil transfer.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
