Gates 90K-38139A serpentine belt drive component kit for the 1998 Ford Windstar V6 3.8L replaces the belt, tensioner and idler pulley together. The kit restores the whole accessory belt drive in one service.
- Serpentine belt, tensioner and idler pulley in a single kit
- Belt with EPDM construction
- Includes Gates belt K061037, tensioner 38139 and idler pulley 38001
- Replacing the tensioner and idler pulley along with the belt helps protect the life of the belt and front-end accessory components
Quick facts
- Part: Gates 90K-38139A serpentine belt drive component kit
- Fits: 1998 Ford Windstar V6 3.8L
- Condition: New
A worn drive can show up as belt squeal, cracks or fraying on the ribs, or a chirp from a noisy tensioner or idler pulley. Those signs alone do not prove this kit is the problem, since a failing alternator bearing can make a similar noise.
Fits
This kit fits the 1998 Ford Windstar V6 3.8L and meets or exceeds OE standards in form, function and fit.
Specifications
Fit and size
- Quantity per vehicle: 1
- Belt outside circumference: 2649 mm (104.31 in)
- Belt top width: 20 mm (0.807 in)
Build and materials
- Contents: belt, tensioner, idler pulley
- Belt construction: EPDM
- Condition: New
- Country of origin: Mexico
In the box
One serpentine belt, one tensioner and one idler pulley, plus tensioner hardware where the application calls for it. This listing is one kit, and the 1998 Ford Windstar V6 3.8L takes one.
Installation notes
- Installation instructions and tech tips come with the kit.
Interchange: DBK061037B
Frequently Asked Questions
Does the Gates 90K-38139A fit the 1998 Ford Windstar V6 3.8L?
Yes. Gates 90K-38139A is listed for the 1998 Ford Windstar V6 3.8L, and that vehicle takes one kit.
What does this Gates drive belt kit contain?
Gates 90K-38139A contains a serpentine belt, a tensioner and an idler pulley, plus tensioner hardware where the application needs it. Installation instructions and tech tips come with the kit.
What size is the belt in this serpentine kit?
The belt is 2649 mm (104.31 in) around the outside and 20 mm (0.807 in) wide across the top, with EPDM construction.
How can I tell if the belt, tensioner or idler pulley is worn?
With the engine off and cool, look for cracks, fraying or glazing on the belt ribs, and for a pulley with visible play or rust. Squealing or chirping while driving can also be a sign of wear.
Is DBK061037B the same as Gates 90K-38139A?
DBK061037B is listed as an interchange number for Gates 90K-38139A. It appears on the Interchange line at the bottom of the page.
