Gates 90K-38284B serpentine belt drive component kit for the 2007-2013 Nissan Altima 4-cylinder 2.5L replaces the accessory drive belt and tensioner together. The belt and tensioner are OE-equivalent, and form, function and fit meet or exceed OE standards.
- Serpentine belt with EPDM construction
- Belt measures 2248 mm (88.5 in) around the outside and 20 mm (.807 in) across the top
- Belt and tensioner come together, since leaving the old tensioner in place can shorten belt life
Quick facts
- Part: Gates 90K-38284B serpentine belt drive component kit
- Fits: 2007-2013 Nissan Altima 4-cylinder 2.5L
- Condition: New
Cracks, fraying or a glazed surface on the belt, or a squeal from the engine, can mean the belt drive needs service. A worn idler pulley, a tired alternator bearing or a water pump that is starting to seize can also be behind squeal or belt wear, so find the cause before buying this kit.
Fits
It fits the 2007-2013 Nissan Altima 4-cylinder 2.5L, which takes one kit.
Specifications
Fit and size
- Quantity per vehicle: 1
- Outside circumference: 2248 mm (88.5 in)
- Belt top width: 20 mm (.807 in)
Build and materials
- Belt construction: EPDM
- Belt part number: K060880A
- Tensioner assembly part number: 38284
- Condition: New
- Country of origin: Mexico
In the box
One serpentine belt and one tensioner.
Installation notes
- Installation instructions and technical tips come with the kit.
Interchange: B40033 · A060878K1 · BK4211 · K49343C · LV999601B
This part cross-references / interchanges with the following part numbers:
B40033, A060878K1, BK4211, K49343C, LV999601B, 90K-38284B
Frequently Asked Questions
Does the Gates 90K-38284B kit fit the 2007-2013 Nissan Altima 4-cylinder 2.5L?
Yes. Gates 90K-38284B is listed for the 2007-2013 Nissan Altima 4-cylinder 2.5L, and that car takes one kit.
Is this Gates drive belt kit sold with both the belt and the tensioner?
Yes. The kit contains one serpentine belt and one tensioner.
What size is the belt in this serpentine belt drive component kit?
The belt in Gates 90K-38284B is 2248 mm (88.5 in) around the outside and 20 mm (.807 in) wide across the top.
What belt wear should I look for before replacing the belt in this kit?
With the engine off and cool, look for cracks, fraying or a glazed belt surface, and look over the tensioner for visible wear. A shop can test the drive for anything else.
Is BK4211 an interchange number for this Gates serpentine belt kit?
Yes. BK4211 is one of the numbers this kit replaces, along with B40033, A060878K1, K49343C and LV999601B.
