Gates 90K-38285 serpentine belt drive component kit for the 2011-2012 Ram 2500 6-cylinder 6.7L and other vehicles replaces the belt, tensioner and idler pulley together. This Gates serpentine belt drive component kit is meant to make proper serpentine system service easier and keep a fleet on the road.
- FleetRunner Heavy Duty line: application-specific serpentine belt, tensioner and idler pulley under one part number
- Belt engineered for high mileage, high idle times and high temperatures in abusive environments
- Hardware supplied where the application calls for it, for a complete belt drive refresh
- Servicing the whole belt drive at once extends preventive maintenance schedules
Quick facts
- Part: Gates 90K-38285 serpentine belt drive component kit
- Fits: 2011-2012 Ram 2500 6-cylinder 6.7L and other vehicles
- Condition: New
A cracked, frayed or glazed belt, a squeal from the belt drive, or a rough, noisy idler pulley or tensioner can mean the kit is due. Before you replace it, rule out oil or coolant on the belt and a stuck accessory pulley, since either can make a belt squeal too. A truck takes one kit, made up of one belt, one tensioner and one idler pulley.
Fits
The kit is listed for a wide range of Dodge, Ram and Sterling Truck models, led by the 2003-2009 Dodge Ram 2500 6-cylinder 5.9L, the 2007-2010 Dodge Ram 2500 6-cylinder 6.7L and the 2011-2012 Ram 3500 6-cylinder 6.7L. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Quantity per vehicle: 1
- Belt outside circumference: 127 in (3227 mm)
- Belt top width: 28 mm (1.087 in)
- Contents: belt, tensioner, idler pulley
Build and materials
- Product line: FleetRunner Heavy Duty
- Condition: New
- Belt part number: K081264HD
- Tensioner assembly part number: 38285
- Idler pulley part number: 36315
- Country of origin: Canada
In the box
One serpentine belt, one tensioner and one idler pulley.
Interchange: ACK081264HD · DBK081264HD
This part cross-references / interchanges with the following part numbers:
ACK081264HD, DBK081264HD, 90K-38285
Frequently Asked Questions
Is the Gates 90K-38285 kit right for a 2011-2012 Ram 3500 6-cylinder 6.7L?
Yes. Gates 90K-38285 is listed for the 2011-2012 Ram 3500 6-cylinder 6.7L, and each truck takes one kit. For other models, open the "Vehicles it fits" section.
Does this Gates drive belt kit come with a tensioner and idler pulley?
Yes. Gates 90K-38285 contains one serpentine belt, one tensioner and one idler pulley. Hardware is supplied where the application calls for it.
What size is the belt in this serpentine belt kit?
The belt measures 127 in (3227 mm) around the outside and 28 mm (1.087 in) across the top. Its part number is K081264HD.
How can I tell if my serpentine belt, tensioner or idler pulley is worn?
With the engine off, look for cracks, fraying or glazing on the belt. A squeal or rough noise from the belt drive while driving can also point to wear.
Does Gates 90K-38285 replace kit number ACK081264HD?
Yes. ACK081264HD is a cross-reference number for Gates 90K-38285, so either number leads to this kit.
