Gates 90K-38323D serpentine belt drive component kit for the 2006-2010 Dodge Charger V6 3.5L and other vehicles replaces the accessory belt drive parts as one set. Leaving an old tensioner or idler pulley in place can shorten the life of a new belt.
- Serpentine belt with EPDM construction
- Tensioner and idler pulley come with the belt in a single kit
- Kit contents vary with the specific needs of the application
Quick facts
- Part: Gates 90K-38323D serpentine belt drive component kit
- Fits: 2006-2010 Dodge Charger V6 3.5L and other vehicles
- Condition: New
A squealing belt, cracks across the ribs or a rough, noisy tensioner or idler pulley can mean the belt drive is worn, though a failing alternator or a seized accessory bearing can make similar noise, so find the cause before buying.
Fits
Among the vehicles it fits are the 2006-2010 Chrysler 300 V6 3.5L and the 2009-2010 Dodge Challenger V6 3.5L, and the 2006-2010 Dodge Charger V6 3.5L takes one kit. The belt, tensioner and idler pulley are OE-equivalent and meet or exceed OE standards in form, function and fit. If your car isn't named here, look it up in the "Vehicles it fits" section.
Specifications
Fit and size
- Quantity per vehicle: 1
- Belt outside circumference: 2102 mm (82.75 in)
- Belt top width: 20 mm (0.807 in)
- Contents: belt, tensioner, idler pulley
Build and materials
- Belt construction: EPDM
- Gates belt part number: K060822
- Gates tensioner assembly part number: 38323
- Gates idler pulley part number: 38082
- Condition: New
- Country of origin: Canada
In the box
A belt, a tensioner, an idler pulley and any tensioner hardware the application calls for.
Installation notes
- Installation instructions and tech tips come in the kit.
- They are written for easy, accurate installation.
Frequently Asked Questions
Does the Gates 90K-38323D kit fit the 2009-2010 Dodge Challenger V6 3.5L?
Yes. Gates 90K-38323D fits the 2009-2010 Dodge Challenger V6 3.5L, and that vehicle takes one kit.
Is tensioner hardware included in this serpentine belt drive component kit?
Yes. The necessary tensioner hardware comes in the kit where the application needs it, and kit contents vary with the application.
What size is the belt in the Gates 90K-38323D kit?
The belt has an outside circumference of 2102 mm (82.75 in) and a top width of 20 mm (0.807 in).
Does this kit replace the whole Gates belt drive system?
No. This kit covers the belt, tensioner and idler pulley; the accessories the belt drives, such as the alternator, are sold separately.
Do instructions come with this serpentine belt drive component kit?
Yes. Installation instructions and tech tips are included with the kit.
