Gates 90K-38386 serpentine belt drive component kit for the 1996-1999 Ford Mustang V8 4.6L and other vehicles replaces the accessory drive belt together with its tensioner and idler pulley. A Gates serpentine belt drive component kit lets you service the whole accessory belt drive in one job.
- Replacing the tensioner and idler pulley along with the belt helps protect belt life and other front-end accessory components
- Serpentine belt with EPDM construction
- Tensioner, applicable idler pulleys and applicable tensioner hardware, matched to the vehicle application
- Contents vary with the specific needs of the vehicle application
Quick facts
- Part: Gates 90K-38386 serpentine belt drive component kit
- Fits: the 1996-1999 Ford Mustang V8 4.6L and other vehicles
- Condition: New
A cracked, frayed or glazed belt, a squeal or chirp from the front of the engine, or play and roughness in the tensioner or idler pulley can mean the belt drive is worn. Before you replace this kit, rule out a fluid leak onto the belt or a seized accessory pulley, since those also make a belt squeal.
Fits
Vehicles it fits include the 1996-1999 Ford Mustang V8 4.6L, the 1995-1999 Ford Crown Victoria V8 4.6L and the 1995-1999 Ford Grand Marquis V8 4.6L. The kit meets or exceeds OE standards in form, function and fit, and the 1996-1999 Ford Mustang V8 4.6L takes one. If your car is not named here, look it up in the "Vehicles it fits" section.
Specifications
Fit and size
- Quantity per vehicle: 1
- Outside circumference: 2492 mm (98.11 in)
- Belt top width: 20 mm (0.807 in)
- Contents: belt, tensioner, idler pulley
Build and materials
- Belt construction: EPDM
- Belt part number: K060975
- Tensioner assembly part number: 38386
- Idler pulley part number: 38006
- Condition: New
- Country of origin: Mexico
In the box
One serpentine belt, one tensioner, an idler pulley and the tensioner hardware the application needs.
Installation notes
- Installation instructions and tech tips come in the kit.
- The kit is designed for easy, accurate installation.
Interchange: 5060975K2 · DBK060975A
This part cross-references / interchanges with the following part numbers:
90K-38386, 5060975K2, DBK060975A
Frequently Asked Questions
Does the Gates 90K-38386 belt kit fit the 1996-1999 Ford Mustang V8 4.6L?
Yes. Gates 90K-38386 fits the 1996-1999 Ford Mustang V8 4.6L and the 1995-1999 Ford Crown Victoria V8 4.6L. If your vehicle is not named, look it up in the "Vehicles it fits" section.
What parts come with this Gates drive belt kit?
Gates 90K-38386 includes a belt, a tensioner, an idler pulley and the tensioner hardware the application needs. Contents vary with the vehicle application.
What is the belt in kit 90K-38386 made of, and how long is it?
The belt has EPDM construction and a 2492 mm (98.11 in) outside circumference. Its top width is 20 mm.
How can I tell if the belt, tensioner or idler pulley in my serpentine drive is worn?
With the engine off, look for cracks, fraying or glazing on the belt, and for play or roughness in the tensioner and idler pulley. A squeal or chirp while driving can also point to wear.
Does Gates 90K-38386 replace DBK060975A?
Yes. DBK060975A is listed as an interchange number for Gates 90K-38386, along with 5060975K2.
