Gates 90K-39112 serpentine belt drive component kit for the 2008-2013 BMW 128i 6-cylinder 3.0L and other vehicles replaces the accessory belt together with its tensioner and idler pulley. That lets you service the whole belt drive in one job.
- Belt, tensioner and idler pulley supplied together for the whole accessory drive
- Serpentine belt with EPDM construction
- Applicable tensioner hardware included with the kit
- Skipping the tensioner and pulleys when changing the belt can shorten the belt's life
- Kit contents vary with the specific needs of the vehicle application
Quick facts
- Part: Gates 90K-39112 serpentine belt drive component kit
- Fits: 2008-2013 BMW 128i 6-cylinder 3.0L and other vehicles
- Position: alternator, water pump and power steering
- Condition: New
A squealing or chirping belt, cracked or glazed ribs you can see with the engine off and cool, or a noisy tensioner can mean this drive is worn, though a failing alternator or water pump bearing can make similar noise, so find the cause before replacing the kit.
Fits
The 2008-2013 BMW 128i 6-cylinder 3.0L, the 2007-2013 BMW 328i 6-cylinder 3.0L and the 2009-2013 BMW 328i xDrive 6-cylinder 3.0L are covered, along with more BMW models. If your car is not one of these, check it in the "Vehicles it fits" section. The kit is a direct-fit replacement for these vehicles and meets or exceeds OE standards in form, function and fit.
Specifications
Fit and size
- Position: alternator, water pump and power steering
- Quantity per vehicle: 1
- Belt outside circumference: 2007 mm (79.034 in)
- Belt top width: 20 mm (.807 in)
Build and materials
- Kit contents: belt, tensioner, idler
- Belt construction: EPDM
- Belt part number: K060785
- Tensioner assembly part number: 39112
- Idler pulley part number: 36369
- Condition: New
- Country of origin: Canada
In the box
One serpentine belt, one tensioner, the applicable idler pulleys and the applicable tensioner hardware. This listing is one kit, and the vehicle takes one.
Installation notes
- Installation instructions and tech tips come with the kit.
Interchange: ADK0022P · DBK060785
This part cross-references / interchanges with the following part numbers:
ADK0022P, DBK060785, 90K-39112
Frequently Asked Questions
Does the Gates 90K-39112 kit fit the 2007-2013 BMW 328i 6-cylinder 3.0L?
Yes. The Gates 90K-39112 kit fits the 2007-2013 BMW 328i 6-cylinder 3.0L. For any other car, check the "Vehicles it fits" section.
Is the Gates drive belt kit just a belt?
No. The Gates 90K-39112 kit holds a serpentine belt with EPDM construction, a tensioner, the applicable idler pulleys and the applicable tensioner hardware.
How big is the belt in the Gates serpentine belt drive component kit?
The belt has an outside circumference of 2007 mm (79.034 in) and is 20 mm (.807 in) wide across the top.
Do the contents of this belt kit change from one application to another?
Yes. Contents vary with the specific needs of each vehicle application, and the vehicle takes one kit.
Does this serpentine belt kit come with installation instructions?
Yes. The kit comes with installation instructions and tech tips, plus the tensioner hardware that applies to the application.
