Gates 90K-39120G serpentine belt drive component kit for the 2009-2012 Jeep Liberty V6 3.7L and other vehicles replaces the belt and tensioner of the accessory belt drive in one service.
- Serpentine belt and tensioner supplied together, so the accessory belt drive is serviced in one pass
- Serpentine belt with EPDM construction
- Tensioner included, because an old tensioner left in place can shorten the life of the new belt and of other front-end accessory components
Quick facts
- Part: Gates 90K-39120G serpentine belt drive component kit
- Fits: 2009-2012 Jeep Liberty V6 3.7L and other vehicles
- Condition: New
A squeal or chirp from the belt drive, cracks or glazing on the ribs, or a belt that slips can mean the belt or tensioner is worn, though a failing alternator or a worn accessory pulley bearing may be the source, so look into those before replacing anything. Each engine takes one kit, with one belt and one tensioner.
Fits
This kit fits the 2009-2012 Jeep Liberty V6 3.7L and the 2010-2011 Dodge Nitro V6 3.7L. It meets or exceeds OE standards in form, function and fit.
Specifications
Fit and size
- Quantity per vehicle: 1
- Belt outside circumference: 2257 mm (88.87 in)
- Belt top width: 20 mm (.807 in)
Build and materials
- Contents: belt, tensioner
- Belt construction: EPDM
- Belt part number: K060882
- Tensioner assembly part number: 39120
- Condition: New
- Country of origin: Mexico
In the box
One serpentine belt and one tensioner.
Interchange: BK4249 · LV999445F · DBK060882C
This part cross-references / interchanges with the following part numbers:
BK4249, LV999445F, DBK060882C, 90K-39120G
Frequently Asked Questions
Is the Gates serpentine belt drive component kit right for a 2010-2011 Dodge Nitro V6 3.7L?
Yes. Gates 90K-39120G fits the 2010-2011 Dodge Nitro V6 3.7L, as well as the 2009-2012 Jeep Liberty V6 3.7L.
What's in this Gates drive belt kit?
This kit contains a serpentine belt and a tensioner. The belt has EPDM construction.
What size is the belt in this serpentine kit?
The belt measures 2257 mm (88.87 in) around the outside and 20 mm (.807 in) across the top. The belt part number is K060882.
How can I tell the belt and tensioner in this kit are worn?
With the engine off and cool, look for cracks, fraying or glazed ribs on the belt. A squeal, chirp or slipping belt can also mean wear.
Does Gates 90K-39120G replace DBK060882C?
Yes. DBK060882C is listed as an interchange number for this kit, along with BK4249 and LV999445F.
