GB 722-5074PK fuel injector set for the 2004-2010 Ford E-350 Super Duty V8 6.0L and other vehicles meters diesel fuel into the engine. Each GB fuel injector in this remanufactured four-pack is rebuilt with OE quality components.
- Completely torn down, ultrasonically cleaned and inspected during remanufacturing
- Every injector tested on a flow bench under multiple operating parameters
- Solenoids replaced on every injector, which removes wire insulation cracking and coil failure
- Connector replaced for a proper harness connection and sealing through the valve cover
- New spool valves with updated features to reduce injector stiction
- Precision ground nozzles, 100% flow tested for accurate fuel delivery
Quick facts
- Part: GB 722-5074PK fuel injector set
- Fits: 2004-2010 Ford E-350 Super Duty V8 6.0L and other vehicles
- Condition: Remanufactured
Hard starting, a rough idle or fuel or oil leaking near an injector can mean an injector is worn, but other faults can show up the same way. With the engine off and cool, look over the injector area for leaks and damaged wiring before you replace anything. This listing is a set of four, and the 2004-2010 Ford E-350 Super Duty V8 6.0L takes two.
Fits
This diesel fuel injector set is a direct-fit replacement for the 2004-2010 Ford E-350 Super Duty V8 6.0L, the 2004-2010 Ford E-450 Super Duty V8 6.0L and the 2004-2008 Ford F-650 V8 6.0L. These GB injectors also suit other Ford and International vehicles, so open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Engine: V8-6.0L
- Quantity per application: 2
- Pieces in the set: 4
Build and materials
- Type: remanufactured diesel fuel injector
- Condition: Remanufactured
- Seals: new o-rings and seals, copper combustion seal
- Country of origin: United States
In the box
Four remanufactured fuel injectors, with new o-rings and seals and a copper combustion seal.
Installation notes
- An application-specific technical bulletin comes with the set. It highlights critical aspects of the job and gives technical tips for installation.
Interchange: 4C3Z9E527AA · 4C3Z9E527ARM · 4C3Z9E527BRM · 1844751C2 · 1845150C92 · 1846692C92 · 1877748C1 · 1878284C91 · 1878285C91 · 1879998C91
This part cross-references / interchanges with the following part numbers:
4C3Z9E527AA, 4C3Z9E527ARM, 4C3Z9E527BRM, 1844751C2, 1845150C92, 1846692C92, 1877748C1, 1878284C91, 1878285C91, 1879998C91
Frequently Asked Questions
Does the GB 722-5074PK fit the 2004-2010 Ford E-350 Super Duty V8 6.0L?
Yes, GB 722-5074PK is listed for the 2004-2010 Ford E-350 Super Duty V8 6.0L and the 2004-2008 Ford F-650 V8 6.0L; open the "Vehicles it fits" section to check other models.
Do these remanufactured diesel injectors come with new o-rings and seals?
Yes. The GB 722-5074PK pack has four injectors with new o-rings and seals and a copper combustion seal.
How are the nozzles and spool valves tested on these injectors?
The precision ground nozzles are 100% flow tested, and the spool valves are 100% leak and flow tested. Each injector is also tested on a flow bench under multiple operating parameters.
Could hard starting on my 6.0L diesel mean an injector is worn?
Yes, it can, but hard starting, a rough idle or a fuel or oil leak near an injector can each have other causes. A shop can test the injectors to confirm.
Does this injector set include a technical bulletin?
Yes. An application-specific technical bulletin comes with the set, covering the critical points of the job and tips for installing the injectors.
