GMB 125-5930 water pump for the 1996 Ford F-250 V8 7.3L and other vehicles circulates coolant through the engine. This GMB water pump is built to OE-level specifications and designed to match OE coolant flow rate and pressure.
- 100% factory tested for leakage and dimensional precision
- Bearing noise and durability testing
- Aluminum casting with a metal impeller
- Reverse impeller rotation for a serpentine belt drive
Quick facts
- Part: GMB 125-5930 water pump
- Also called: engine water pump
- Fits: 1996 Ford F-250 V8 7.3L and other vehicles
- Material: aluminum casting, metal impeller
A worn water pump can show up as coolant seeping at the pump, a whine or grinding from the bearing, or an engine that runs hot. A thermostat, radiator, hose or drive belt can be behind these signs too, so find the cause before buying a pump. The 1996 Ford F-250 V8 7.3L takes one.
Fits
This water pump is a direct-fit replacement for the 1996 Ford F-250 V8 7.3L, the 2003 Ford E-350 Club Wagon V8 7.3L and the 1999-2003 Ford E-350 Super Duty V8 7.3L. Open the "Vehicles it fits" section to check your exact model, year and engine.
Specifications
Fit and size
- Quantity per vehicle: 1
- Drive type: serpentine belt
- Impeller rotation: reverse
- Hub diameter: 2.91 in
- Hub height: 4.220 in
Build and materials
- Casting material: aluminum
- Impeller material: metal
- Gasket material: rubber
- Country of origin: China
In the box
One water pump, its bolts and three gaskets or seals. The pulley, bracket, sensor, thermostat, fan clutch and back housing are not included.
Installation notes
- Instructions come with the pump.
- All required hardware is included for easy installation.
Frequently Asked Questions
Is GMB 125-5930 a Ford F-250 water pump for the 1996 model year with the V8 7.3L?
Yes, GMB 125-5930 fits the 1996 Ford F-250 V8 7.3L and the 2003 Ford E-350 Club Wagon V8 7.3L; open the "Vehicles it fits" section to check other models.
Does the GMB engine water pump come with a gasket?
Yes, GMB 125-5930 includes three gaskets or seals, its bolts and instructions; the pulley, bracket, sensor, thermostat, fan clutch and back housing are not included.
Is this GMB new water pump made for a serpentine belt drive?
Yes, this pump is for a serpentine belt drive and has reverse impeller rotation, a 2.91 in hub diameter and a 4.220 in hub height; the pulley is not included.
How can I tell if a water pump bearing is going bad?
A whine or grinding that seems to come from the pump, or coolant residue around it on a cool engine, can mean a worn bearing or seal. A shop can test the pump and the drive belt.
Is each GMB pump tested at the factory?
Yes, the GMB 125-5930 is 100% factory tested for leakage and dimensional precision, and it is tested for bearing noise and durability.
