GMB 150-2540 water pump for the 2013-2018 Nissan Altima 4-cylinder 2.5L and other vehicles circulates coolant through the engine. Its coolant flow rate and pressure are designed to match OE, and it is built to OEM specifications or better.
A whining or grinding noise, coolant seepage at the pump or an engine running hot can mean the pump is wearing out. With the engine off and cool, you can look for coolant traces around it. Overheating alone does not prove the pump is at fault; a coolant leak elsewhere in the system gives the same symptom.
This pump is listed for a wide range of Nissan and Infiniti models. It is a water pump for the 2014-2020 Nissan Rogue 4-cylinder 2.5L and the 2014 Nissan Pathfinder 4-cylinder 2.5L too, and each takes one. Open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
One water pump with its serpentine pulley, one gasket or seal, mounting hardware and an instruction sheet. Bolts, a bracket, a sensor, a thermostat, a fan clutch and a back housing are not included, and since the old bolts may not be reusable, plan on new ones.
Interchange: WPN709 · 1312467 · DP2078 · 41150 · 210103TA0B · US8105
This part cross-references / interchanges with the following part numbers:
Does this Nissan Altima water pump fit a 2013-2018 model with the 4-cylinder 2.5L engine?
Yes, GMB 150-2540 is listed for the 2013-2018 Nissan Altima 4-cylinder 2.5L, and the car takes one. Open the "Vehicles it fits" section to check your exact model and engine.
Is there a Nissan Pathfinder water pump for the 2014 model with the 4-cylinder 2.5L?
Yes, GMB 150-2540 is listed for the 2014 Nissan Pathfinder 4-cylinder 2.5L, and that vehicle takes one.
Does this GMB water pump come with the pulley and gasket?
Yes, the pump comes with a serpentine pulley, one gasket or seal, mounting hardware and an instruction sheet. Bolts are not included.
What is the GMB engine water pump casting made of?
The casting is aluminum and the impeller is metal. The included gasket is metal as well.
Is the GMB 150-2540 pump tested for leaks and bearing noise?
Yes, every GMB 150-2540 pump is factory tested for leakage and dimensional precision. Its bearing is also tested for noise and durability.
Published by the manufacturer of this part. Links open in a new tab.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
