Hitachi Astemo VTG0014 VVT sprocket for the 2014-2018 Nissan Altima V6 3.5L and other vehicles turns the intake camshaft and lets the variable valve timing system shift cam timing.
A worn VVT sprocket can show up as a rattle on a cold start, a rough idle or a cam timing fault code. Before you replace this sprocket, rule out low or dirty oil and a faulty VVT solenoid, since a failing solenoid can also trigger cam timing codes.
This intake VVT sprocket fits the 2014-2018 Nissan Altima V6 3.5L, the 2016-2019 Nissan Maxima V6 3.5L and the 2015-2016 Nissan Pathfinder V6 3.5L, and it is a new OE part for these vehicles. The 2014-2018 Nissan Altima V6 3.5L takes two.
Fit and size
Build and materials
The VVT sprocket. A gasket is not included.
Interchange: 13025-9HP0A
916566 · VVT550
This part cross-references / interchanges with the following part numbers:
Does the Hitachi Astemo VTG0014 fit the 2016-2019 Nissan Maxima V6 3.5L?
Yes, Hitachi Astemo VTG0014 fits the 2016-2019 Nissan Maxima V6 3.5L, which takes two. If your car is not named here, look up its year and engine on the Buyer's Guide tab.
Is the engine variable valve timing VVT sprocket VTG0014 for the intake or exhaust camshaft?
Hitachi Astemo VTG0014 is an intake-position VVT sprocket.
Does the VTG0014 VVT sprocket come with a gasket?
No. A gasket is not included with this VVT sprocket, so it has to be sourced separately if your job needs one.
What is the outside diameter of this intake VVT sprocket?
The outside diameter of this intake VVT sprocket is 4.04 in, which is useful when comparing it against the old one.
Is 13025-9HP0A a cross-reference for the Hitachi Astemo VTG0014?
Yes, 13025-9HP0A is listed as an interchange number for the Hitachi Astemo VTG0014 VVT sprocket.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
