Hooker Exhaust Header P/N:2817-1HKR
Hooker 2452-1HKR exhaust header for the 1987 GMC R1500 Suburban V8 5.0L, the 1987-1991 R1500 Suburban V8 5.7L and other vehicles collects exhaust from each cylinder and routes it into a collector. This long-tube header suits 2WD applications and has a metallic ceramic coating.
A header with a cracked tube, a burnt-through spot or a leaking flange can show up as a ticking or puffing sound near the cylinder head or as an exhaust smell. Before you replace the header, rule out a leaking gasket or loose bolts at the same port, since either can sound much alike.
The 1987 GMC R1500 Suburban V8 5.0L, the 1987-1991 R1500 Suburban V8 5.7L, the 1989-1991 Chevrolet R1500 Suburban V8 5.7L and the 1989-1991 Chevrolet R2500 Suburban V8 5.7L all fit this header, and so do a wide range of other vehicles. If your truck is not named here, look up its year and engine in the "Vehicles it fits" section. This header does not fit angel plug or raised port heads. It is sold as a pair, one header on each side of the engine.
Fit and size
Build and materials
One pair of exhaust headers with bolts and the other hardware needed to install them. A collector reducer is not included.
Product information is for general reference and may contain errors. See our Disclaimer.
Will the Hooker 2452-1HKR header fit a 1989-1991 Chevrolet R1500 Suburban V8 5.7L?
Yes, Hooker 2452-1HKR fits the 1989-1991 Chevrolet R1500 Suburban V8 5.7L; for other years and engines, look in the "Vehicles it fits" section.
Does this long-tube header fit angel plug or raised port heads?
No. This header does not fit angel plug or raised port heads.
What hardware comes with the Hooker 2452-1HKR header?
The pair of Hooker 2452-1HKR headers includes bolts (3/8-16 x 3/4 in.) and the other hardware needed to install them. A collector reducer is not included.
What are the primary tube and collector sizes on this exhaust header?
The primary tubes are 1.625 in. in diameter and 27 in. long. The collector is 2.5 in. in diameter and 8 in. long.
Is this exhaust header made of stainless steel?
No. This header is made of 16 gauge mild steel tubing with a silver metallic ceramic finish.
Published by the manufacturer of this part. Links open in a new tab.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.