Four Seasons HVAC Blend Door Actuator,HVAC Mode Door Actuator P/N:73627
Four Seasons 37534 recirculation door actuator for the 1997-2004 Ford F-150 and other vehicles moves the HVAC door that sets where cabin air comes from. Also called an HVAC recirculation door actuator, it swings that door when you change the climate controls.
If the airflow source does not change when you switch between fresh and recirculated air, the actuator may be worn or failing. Those symptoms alone do not prove this actuator is the problem; a jammed door or a wiring fault would act the same way.
The 1997-2004 Ford F-150, the 1997-2002 Ford Expedition and the 1997-1999 Ford F-250 take this actuator, along with more Ford and Lincoln models. The 1997-2004 Ford F-150 takes one, and the part meets or exceeds OE specifications for fit and function. Look up your own truck or SUV in the "Vehicles it fits" section further down this page.
Fit and size
Build and materials
One recirculation door actuator, with lever arm, gear, cam gear hardware and linkage as applicable.
Interchange: 604205 · BDAD1005 · 2L3Z19E616BA · F65Z19E616AB · F75Z19E616AA · F85Z19E616AA · XL3Z19E616BA · 1711898 · YH1747 · DA1129 · 6551969 · A10134 · MT18556 · FD0613094
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Four Seasons 37534 actuator right for a 1997-2004 Ford F-150?
Yes. Four Seasons 37534 fits the 1997-2004 Ford F-150 and other vehicles. Look up your own truck in the "Vehicles it fits" section to confirm it is covered.
Does this recirculation door actuator fit a 1997-2002 Ford Expedition?
Yes. Four Seasons 37534 fits the 1997-2002 Ford Expedition, and that SUV takes one actuator.
Does the 37534 actuator come with a lever arm and linkage?
Four Seasons 37534 comes with the lever arm, gear, cam gear hardware and linkage as applicable to the application.
How many terminal pins does this recirculation door actuator have?
This actuator has 8 terminal pins. Compare that count with the connector on your old unit before ordering.
Why does my dash click when I change the HVAC air setting?
Clicking or ticking behind the dash when you change settings can mean worn drive gears in an actuator. A shop can test it before you replace anything.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.