Four Seasons HVAC Blower Motor Resistor P/N:20351
Keep your heater and A/C fan speeds under control with the Four Seasons switch 20375, an HVAC blower motor resistor that regulates the current sent to the blower motor so the fan can run at each of its settings. It is a direct-fit replacement for the listed applications: the 2007-2012 Nissan Versa, 2007-2018 Nissan Tiida and 2009-2013 Nissan Cube. See the Buyer's Guide tab for engine details.
This part is cataloged under two names, HVAC Blower Motor Resistor / Switch, and both describe the same unit. On the lower fan settings, a blower motor resistor reduces the voltage reaching the blower motor to set a slower speed. If a failed resistor is behind a fan that runs only on high or skips speeds, this Versa switch replaces it.
Signs this part may need replacing: a blower that works only on its highest setting, one or more fan speeds that no longer work, or no blower operation at all. A blower motor or wiring fault can cause the same symptoms, so diagnose the cause before replacing the resistor.
Interchange: 4P1688 · 27150ED000 · 27150ED00A · 973116 · 984128 · 1712401 · A06725 · MT18085 · SW11230C · SW11383 · SW11383C · JA1810 · JA1832
This part cross-references / interchanges with the following part numbers:
What does the Four Seasons 20375 do?
It is an HVAC blower motor resistor, also listed as a switch. It varies the current sent to the blower motor so the heater and A/C fan can run at different speeds.
Is the 20375 the right Cube switch for my 2009-2013 Nissan Cube?
It is listed as a direct-fit replacement for the 2009-2013 Nissan Cube. Check the Buyer's Guide tab to confirm your exact vehicle and engine.
What are the signs of a failing blower motor resistor?
Common signs are a blower that works only on high, fan speeds that no longer work, or no blower at all. A motor or wiring fault can cause the same symptoms, so diagnose the cause first.
What features does this blower motor resistor have?
Four Seasons lists quality contacts for proper conductivity, OE-style connectors, precision engineering and vehicle-specific applications.
How is the blower motor resistor installed?
Unplug the electrical connector, remove the old resistor, fit the new unit in its place and reconnect it. Follow the vehicle service information for its location and the correct procedure.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.