Dayco 71681 upper heater hose for the 2010-2012 Toyota Camry 4-cylinder 2.5L and other vehicles carries engine coolant to the heater circuit. This Dayco heater hose is a single I.D. hose, also known as an HVAC heater hose.
- Single I.D. hose, 5/8 in (.63 in) in size
- EPDM hose material
- Built to SAE J20R4 Class D-1 and SAE J1684 Type EC
- Trunk height of 4 in
Quick facts
- Part: Dayco 71681 heater hose
- Also called: HVAC heater hose
- Fits: 2010-2012 Toyota Camry 4-cylinder 2.5L and other vehicles
- Position: heater to valve, heater to pipe, pipe-1 to engine, heater to tee-1, heater to tee, heater - upper to tee, tee to pipe (outlet)
- Material: EPDM
- Condition: New
Coolant seeping at a hose end, a cracked or swollen hose, or weak cabin heat can mean the hose is wearing out. Weak heat alone does not prove the hose is the problem; a thermostat stuck open can cause it too.
Fits
This hose is listed for a wide range of models from Toyota, Chevrolet, GMC and other makes, including the 2009-2018 Chevrolet Traverse and the 2007-2016 GMC Acadia. Each of them takes one. If your car is not named here, open the Buyer's Guide tab to check your exact model and engine.
Specifications
Fit and size
- Position: heater to valve, heater to pipe, pipe-1 to engine, heater to tee-1, heater to tee, heater - upper to tee, tee to pipe (outlet)
- Quantity per vehicle: 1
- Hose size: 5/8 in (.63 in)
- Trunk height: 4 in
Build and materials
- Hose type: single I.D. hose
- Material: EPDM
- SAE specification: SAE J20R4 Class D-1, SAE J1684 Type EC
- Condition: New
In the box
One heater hose. A protective sleeve and a heat shield are not included.
Interchange: 14401S · 19326 · 63041 · KM2465 · 11326
Frequently Asked Questions
Is this the right Chevy Traverse heater hose for a 2009-2018 Chevrolet Traverse?
Does this Camry heater hose fit the 2010-2012 Toyota Camry 4-cylinder 2.5L?
Yes. Dayco 71681 is listed for the 2010-2012 Toyota Camry with the L4-2.5L engine, and the Camry takes one.
Is the Dayco 5/8 in heater hose made of EPDM?
Yes. Dayco 71681 is an EPDM single I.D. hose, 5/8 in (.63 in) in size, built to SAE J20R4 Class D-1 and SAE J1684 Type EC.
Does the 71681 heater hose come with a protective sleeve or heat shield?
No. The listing is one heater hose, and neither a protective sleeve nor a heat shield is included.
Does Dayco 71681 replace part number 19326?
Yes. 19326 is one of the numbers on the Interchange line for this Dayco 71681 hose.
This part cross-references / interchanges with the following part numbers:
14401S, 19326, 63041, KM2465, 11326, F32Z-8597-C, YL8Z-6N746-DA, 15984156, 25681953, 25862088, 94854869, 79723-S2A-A01, FS01-15-288, FS01-15-288A, FS60-15-288, 87245-33610
