INA US FT40496 belt tensioner for the 2013-2015 BMW X1 6-cylinder 3.0L and other vehicles keeps the engine's accessory drive belt under steady tension. This accessory drive belt tensioner is an INA front end auxiliary drive (FEAD) unit.
- Precise tension control for consistent running of the engine's accessory systems
- Vibration damping in small installation spaces on high-load engines
- Steady belt tension that prevents slippage and reduces premature wear on the belt and accessories
- Minimized noise and vibration for smoother, quieter engine operation
Quick facts
- Part: INA US FT40496 belt tensioner
- Also called: accessory drive belt tensioner
- Fits: the 2013-2015 BMW X1 6-cylinder 3.0L and other vehicles
- Condition: New
Belt squeal, a slipping belt or noise from the front of the engine can mean the tensioner is weakening. Before ordering, look over the belt with the engine off and cool for cracks or glazing and check the pulleys for play, since a worn belt or accessory pulley can make similar noise.
Fits
This belt tensioner fits the 2013-2015 BMW X1 6-cylinder 3.0L, the 2011-2013 BMW 135i 6-cylinder 3.0L and the 2013 BMW 135is 6-cylinder 3.0L, with one tensioner per engine. For another model or engine, open the "Vehicles it fits" section and check your exact model and engine.
Specifications
- Type: FEAD tensioner assembly
- Quantity per vehicle: 1
- Condition: New
- Country of origin: Slovakia
Interchange: 7808-21816 · 15-4129
11 28 7 582 946 · 7 582 946 · 20 94 8742 · 49474 · 57610 · T39416 · 5340496100
This part cross-references / interchanges with the following part numbers:
11 28 7 582 946, 7 582 946, 49474, 57610, 7808-21816, T39416, 5340496100, 15-4129, 20 94 8742
Frequently Asked Questions
Is this BMW X1 belt tensioner right for a 2013-2015 model with the 6-cylinder 3.0L engine?
Yes. INA US FT40496 fits the 2013-2015 BMW X1 6-cylinder 3.0L, with one tensioner per engine. Use the "Vehicles it fits" section for other models and engines.
What is a FEAD belt tensioner?
FEAD stands for front end auxiliary drive. This INA tensioner holds belt tension and damps vibration in tight installation spaces on high-load engines.
Where is the INA US FT40496 belt tensioner made?
The country of origin for INA US FT40496 is Slovakia.
How can I tell if this belt tensioner is wearing out?
Squealing or chirping from the belt, a slipping belt or uneven belt wear can mean this tensioner is weakening. A shop can test the tensioner while the engine runs.
Is 11 28 7 582 946 an interchange number for this belt tensioner?
Yes. 11 28 7 582 946 is listed as an interchange number for INA US FT40496. The full list of interchange numbers is at the bottom of the description.
