KYB 565009 rear shock absorber for the 1997-2003 Ford F-150 damps rear suspension movement on trucks that tow, haul heavy loads or work off-road. Its high pressure monotube gas design gives up to 40% more damping performance than standard shock absorbers.
- Large-bore KYB MonoMax monotube design for heavier or high center of gravity trucks
- Zinc-coated piston ring that gives a positive seal
- Rubber boot protects the shaft and keeps dirt and debris away from the seals
- Engineered to help vehicles with electronic safety systems such as ESC and ABS
Quick facts
- Part: KYB 565009 shock absorber
- Fits: 1997-2003 Ford F-150
- Position: Rear
- Condition: New
A bouncy ride, a rear end that sways under load or oil on the shock absorber body can mean it is worn. These signs alone do not prove the shock absorber is the problem, since worn tires can give a similar ride. This listing is one shock absorber, and both rear ones are normally replaced together.
Fits
These are shock absorbers for the 1997-2003 Ford F-150, as a direct-fit replacement for the rear position.
Specifications
Fit and size
- Position: rear
- Quantity per vehicle: 2
Build and materials
- Design: monotube gas
- Piston ring: zinc-coated
- Dust boot: rubber, off-road
- Condition: new
In the box
One rear shock absorber with its off-road dust boot. The 1997-2003 Ford F-150 takes two.
Interchange: 2L3Z18125BB · 2L3Z18125EA · F75Z18125AH · G63870 · 911262
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
2L3Z18125BB, 2L3Z18125EA, F75Z18125AH, G63870, 911262
Frequently Asked Questions
Does the KYB rear shock absorber 565009 fit a 1997-2003 Ford F-150?
Yes. KYB 565009 is a rear shock absorber for the 1997-2003 Ford F-150, and the truck takes two.
Is a dust boot included with this KYB shock absorber?
Yes. It comes with an off-road dust boot, which protects the shaft and keeps dirt and debris away from the seals. This listing is one shock.
Is this KYB gas shock absorber a monotube design?
Yes. The 565009 is a high pressure monotube gas shock from KYB's MonoMax line, with a zinc-coated piston ring that gives a positive seal.
How can I tell when a rear shock absorber is wearing out?
Look for oil on the shock absorber body or a torn boot, and notice a bouncy or swaying rear end under load. A shop can test the shock absorber if you are unsure.
Is the KYB 565009 engineered for vehicles with ABS and ESC?
Yes. The 565009 is engineered to help vehicles with electronic safety systems such as ESC and ABS, and it is built for trucks that tow, haul heavy loads or go off-road.
