KYB 565105 rear shock absorber for the 2011-2013 Ram 2500 and other vehicles damps spring movement at the rear axle. This KYB shock absorber is the heavy-duty MonoMax monotube gas shock, made just for trucks.
- KYB MonoMax large-bore design adds stability for heavier, high center of gravity trucks
- Up to 40% more damping performance
- Zinc-coated piston ring for a positive seal
- Rubber off-road dust boot keeps dirt and debris away from the seals
- Engineered to help vehicles with electronic safety systems such as ESC and ABS
Quick facts
- Part: KYB 565105 shock absorber
- Also called: High pressure monotube gas shock
- Fits: 2011-2013 Ram 2500 and other vehicles
- Position: Rear
- Condition: New
Oil wetting the shock absorber body, a dented body, a torn boot or a bouncy, floaty rear ride can mean a rear shock absorber is worn. Look it over with the engine off. Worn springs and tires can feel similar, so find the cause before you replace anything.
Fits
This rear shock absorber fits the 2011-2013 Ram 2500, the 2003-2010 Dodge Ram 2500 and the 2011-2012 Ram 3500. This listing is one shock absorber, and the other rear shock absorber is normally replaced at the same time. If your truck is not named here, open the "Vehicles it fits" section and check your exact model and engine.
Specifications
Fit and size
- Position: Rear
- Quantity per vehicle: 2
Build and materials
- Design: high-pressure monotube gas shock
- Piston ring: zinc-coated
- Dust boot: rubber, off-road
- Condition: New
In the box
One rear shock absorber with its off-road dust boot; the rear axle takes two.
Interchange: 77950
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Does the KYB 565105 rear shock absorber fit the 2003-2010 Dodge Ram 2500?
Yes. KYB 565105 is a rear shock absorber for the 2003-2010 Dodge Ram 2500, and that truck takes two on the rear axle. Open the "Vehicles it fits" section to check your exact model and engine.
Does this rear shock absorber come with a dust boot?
Yes. The listing is one rear shock absorber with an off-road dust boot, which keeps dirt and debris away from the seals.
Is this KYB gas shock absorber a monotube design?
Yes. It is a high-pressure monotube gas shock, the large-bore KYB MonoMax made for trucks.
How can I spot a worn rear shock absorber on a heavy-duty pickup?
With the engine off, look for oil wetting the shock body, a dented body or a torn boot. A bouncy rear ride can also point to a worn shock, though springs and tires can feel similar.
Is this KYB absorber made for trucks with ABS and ESC?
Yes. KYB 565105 is engineered to help vehicles with electronic safety systems such as ESC and ABS.
