KYB SM5092 front strut mount kit for the 1997-1998 Volvo S90 and other vehicles replaces hardened vibration insulators that pass noise into the car. This KYB strut mount kit pairs the mount with a bearing, and front bearing plates are the steering pivots that support vehicle weight.
- Mount cushions impacts from road bumps to reduce jarring, noise and vibration
- Rubber that reduces noise, vibration and harshness
- Mount bearing for smoother steering that helps retain front end alignment
- Matched grade studs and nuts
Quick facts
- Part: KYB SM5092 strut mount kit
- Also called: suspension strut mount kit
- Fits: 1997-1998 Volvo S90 and other vehicles
- Position: Front
- Condition: New
Knocking over bumps, vibration, front-end noise or steering that feels vague can point to worn mounts. A worn strut can make a similar knock, so these signs alone do not prove the mount is the problem.
Fits
This front strut mount kit is made for the 1997-1998 Volvo S90, the 1997-1998 Volvo V90 and the 1992-1997 Volvo 960, among many other Volvo models. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Position: Front
- Quantity per vehicle: 2
Build and materials
- Construction: strut mount with bearing
- Studs and nuts: matched grade
- Condition: New
In the box
Strut mount and bearing with matched grade studs and nuts. The 1997-1998 Volvo S90 takes two, one at each front strut.
Interchange: 142440 · 902911
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Does the KYB SM5092 fit the 1997-1998 Volvo S90 or the 1997-1998 Volvo V90?
Yes. The KYB SM5092 front strut mount kit fits both the 1997-1998 Volvo S90 and the 1997-1998 Volvo V90. Use the "Vehicles it fits" section to check other models and engines.
Does this suspension strut mount kit come with a bearing and studs?
Yes. The KYB SM5092 is a strut mount with a bearing and matched grade studs and nuts.
Is the KYB SM5092 a front or rear strut mount?
It is a front strut mount. The KYB SM5092 is a front-position part, and the fitment calls for two per vehicle, one for each front strut.
Why does a front strut mount have a bearing?
The front bearing plate works as the steering pivot and supports vehicle weight. In this mount, the bearing helps give smoother steering and helps retain front end alignment.
Can old, hardened strut mounts make a front end vibrate or sound noisy?
Yes. Hardened vibration insulators can pass road noise, vibration and jarring from bumps into the vehicle, and a worn mount bearing can affect steering feel and alignment.
