KYB 339337 front left suspension strut assembly for the 2013-2016 Mazda CX-5 manages tire contact, steering response and body movement. This KYB strut assembly is an Excel-G, calibrated to restore original, designed performance, not change it.
- KYB Excel-G line: nitrogen gas-charged, twin-tube design
- Triple lip fluid seal to reduce the chance of oil and gas leaking out
- Vehicle-specific damping valves, hand assembled in-house, to manage tire contact, steering response and body movement
- Thick strut body and brackets that minimize flex to maintain correct alignment
- Helps keep electronic safety systems performing as designed
Quick facts
- Part: KYB 339337 suspension strut assembly
- Fits: 2013-2016 Mazda CX-5
- Position: Front left
- Condition: New
A worn strut can show up as bouncing after bumps, nose dive under braking or fluid on the strut body. Worn mounts or tires can produce similar symptoms, so look for the cause first; with the engine off, an oily film on the strut body is a useful first check. This listing is one front left strut; the front right is a separate part, and both sides are normally replaced together.
Fits
This is a direct-fit replacement for the 2013-2016 Mazda CX-5. The KYB Excel-G strut assembly is made on the same KYB OE assembly lines that supply new-vehicle manufacturers, with OE quality components, and helps restore the designed control and handling of the 2013-2016 Mazda CX-5.
Specifications
Fit and size
- Position: front left
- Quantity per vehicle: 1
Build and materials
- Type: nitrogen gas-charged, twin-tube
- Seal: triple lip fluid seal
- Condition: new
- Country of origin: United States
In the box
One suspension strut assembly for the front left. The 2013-2016 Mazda CX-5 takes one on that side.
Interchange: KD3534900A · 72979
Frequently Asked Questions
Is the KYB front strut assembly 339337 right for the 2013-2016 Mazda CX-5?
Yes, KYB 339337 is the front left strut assembly for the 2013-2016 Mazda CX-5, which takes one on that side; the front right is a separate part.
Is this KYB suspension strut nitrogen gas-charged?
Yes. This Excel-G strut is a nitrogen gas-charged, twin-tube design with a triple lip fluid seal to reduce the chance of oil and gas leaking out.
Is the KYB suspension strut assembly 339337 made in the USA?
Yes. KYB 339337 is made in the USA, and its vehicle-specific damping valves are hand assembled in-house.
How can I tell if this front left strut is wearing out?
Bouncing after bumps, nose dive when braking or fluid on the strut body can mean it is worn. Look at the strut body with the engine off; a shop can road-test it.
Does the Excel-G strut work with electronic safety systems?
Electronic safety systems depend on the suspension, brakes and tires operating as the vehicle manufacturer intended. The Excel-G helps keep them performing as designed.
