KYB 340100 front left suspension strut assembly for the 2014-2015 Infiniti QX50 and other vehicles helps restore the control and handling the car was designed with. This KYB Excel-G strut assembly is a nitrogen gas-charged, twin-tube design made on the same KYB OE assembly lines with OE quality components, and it is classed OEA (Original Equipment for the Aftermarket).
- KYB Excel-G line, calibrated to restore the original designed performance, not change it
- Triple lip fluid seal to reduce the chance of oil and gas leaking out
- Vehicle-specific, hand-assembled in-house damping valves manage tire contact, steering response and body movement
- Thick strut body and brackets that minimize flex and hold correct alignment
Quick facts
- Part: KYB 340100 suspension strut assembly
- Fits: 2014-2015 Infiniti QX50 and other vehicles
- Position: Front left
- Condition: New
Oil on the strut body, a bouncy or nose-diving ride, or a clunk over bumps can mean this strut is worn, though worn strut mounts or tires can be behind the same symptoms, so find the cause before you replace it.
Fits
This strut fits the 2014-2015 Infiniti QX50, the 2013 Infiniti EX37 and the 2008-2012 Infiniti EX35, and each takes one for the front left. The listing is a single strut; the front right is a separate part ordered on its own, and the two sides are normally replaced together.
Specifications
Fit and size
- Position: front left
- Quantity per vehicle: 1 for this side
Build and materials
- Design: twin-tube, nitrogen gas-charged
- Seal: triple lip fluid seal
- Condition: new
Interchange: E61111BA0B · E61111BA0C · 72701
This part cross-references / interchanges with the following part numbers:
E61111BA0B, E61111BA0C, 72701
Frequently Asked Questions
Is this KYB strut assembly right for the 2014-2015 Infiniti QX50?
Yes. KYB 340100 fits the 2014-2015 Infiniti QX50, the 2013 Infiniti EX37 and the 2008-2012 Infiniti EX35, as a front left strut.
Is this KYB front strut assembly the left or right side?
It is the front left. This listing is one strut, and the front right is a separate part that is ordered on its own.
Should I install new strut mounts with this KYB suspension strut?
Yes, new strut mounts (KYB part number SM5733) are recommended to reduce the chance of noise and vibration. The mount is a separate part from this strut.
What protects a KYB suspension strut assembly from dirt and salt?
A KYB Strut Boot, part number SB103, protects a new strut from dirt, debris and salt. The boot is a separate part.
What does the triple lip seal on the Excel-G do?
The triple lip fluid seal on KYB 340100 reduces the chance of oil and gas leaking out of the strut.
