KYB Suspension Strut P/N:341483

Be the first to review this product

$114.99

MPN: 341483

UPC: 781552594215

Item Package Quantity: 1

Current Stock:

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

KYB Suspension Strut P/N:341483

$114.99

Description

Steady your ride and keep the rear suspension working as designed with the KYB Excel-G Suspension Strut 341483, a nitrogen gas-charged, twin-tube strut that drops in as a rear-position replacement for the 2004-2006 KIA AMANTI. Built on KYB's OE assembly lines from OE-quality components, the Excel-G is calibrated to restore a vehicle's original designed damping — earning its OEA (Original Equipment for the Aftermarket) classification.

Twin-tube gas design: Nitrogen gas-charged, twin-tube construction using the same quality components KYB puts in its global OEM products.
Triple-lip fluid seal: Uses a triple-lip fluid seal to reduce the chance of oil and gas leaking out.
Rigid body & brackets: Thick strut bodies and brackets help minimize flex to maintain correct alignment.
Hand-assembled valving: Vehicle-specific, hand-assembled damping valves manage tire contact, steering response and body movement.

KYB recommends installing new strut mounts (part number SM5517) and protecting the strut with a KYB Strut Boot (part number SB101). Worn struts can show up as excess bounce, reduced stability, or poor handling; if the original rear strut is the cause, this unit replaces it.

Interchange: G51825 · 553113F400 · 71115

Manufacturer's Description

Product Specs

Buyer's Guide

Interchange Part Numbers

This part cross-references / interchanges with the following part numbers:

G51825, 553113F400, 71115

Frequently Asked Questions

What vehicle does this strut fit?

It's a rear-position suspension strut for the 2004-2006 KIA AMANTI. Check the Buyer's Guide tab to confirm fitment for your specific vehicle.

Is this a gas or hydraulic strut?

It's a nitrogen gas-charged, twin-tube design from KYB's Excel-G line, calibrated to restore the vehicle's original designed damping.

Should I replace both rear struts at once?

Replacing both sides together as a matched pair is recommended for even, balanced ride and handling. This listing is for one strut.

Do I need new strut mounts or a boot?

KYB recommends installing new strut mounts (part number SM5517) and a KYB Strut Boot (part number SB101) to reduce noise and protect the strut.

What are signs my strut may need replacing?

Excess bouncing, reduced stability, or diminished handling can indicate a worn strut. Diagnose the cause first; if the original is at fault, this replaces it.