LuK LMC469 clutch master cylinder for the 2009-2010 Subaru Outback H4 2.5L and other vehicles turns clutch pedal force into hydraulic pressure for the clutch release system. It is a replacement that meets or surpasses OE specs for fit, form and function.
- Advanced materials and manufacturing techniques for smooth, precise clutch engagement
- Integrated travel sensor, where needed, reads clutch pedal position for start-stop and hill-start functions
- Peak torque limiter, where required, cuts hydraulic volume flow during sport driving to avoid overloading the powertrain
- Push rod included with the master cylinder
Quick facts
- Part: LuK LMC469 clutch master cylinder
- Fits: 2009-2010 Subaru Outback H4 2.5L and other vehicles
- Condition: New
A soft or sinking clutch pedal, fluid around the cylinder or trouble selecting gears can be signs the master cylinder is worn. They can also come from elsewhere in the hydraulic circuit, so before replacing it, look over the master cylinder and its reservoir for seepage with the engine off. The car needs one master cylinder, and this listing is one.
Fits
It is a clutch master cylinder for the 2005-2009 Subaru Legacy H4 2.5L and also fits the 2005-2006 and 2009-2010 Subaru Outback H4 2.5L.
Specifications
- Quantity per vehicle: 1
- Push rod: included
- Pre-filled fluid: no
- Pre-bled: no
- Condition: New
- Country of origin: Taiwan
In the box
One clutch master cylinder with its push rod and installation instructions. The clutch slave cylinder is not included. A heat shield is not included either, so the old one may not be reusable.
Installation notes
- Installation instructions come with the master cylinder.
Interchange: 37230-AG060
M1505 · 5110530100 · SH5331
This part cross-references / interchanges with the following part numbers:
M1505, 5110530100, SH5331, 37230-AG060
Frequently Asked Questions
Does LuK LMC469 work as a Subaru Outback clutch master cylinder in the 2005-2006 and 2009-2010 model years with the H4 2.5L?
Yes. LuK LMC469 fits the 2005-2006 and 2009-2010 Subaru Outback H4 2.5L. It also fits the 2005-2009 Subaru Legacy H4 2.5L.
Does this clutch master cylinder come with the push rod?
Yes. The LuK LMC469 includes its push rod and installation instructions. The clutch slave cylinder is not included, and the unit is not pre-filled with fluid or pre-bled.
What does the integrated travel sensor on a LuK clutch master cylinder do?
Where an application needs it, the sensor reads the position of the clutch pedal. Start-stop systems and functions such as hill-start and speed control use that signal.
How can I tell if the master cylinder behind my clutch pedal is leaking?
With the engine off, look for fluid around the cylinder and under the pedal, and watch for a falling reservoir level. A soft pedal or trouble selecting gears can also be signs.
Does the LuK LMC469 replace number 37230-AG060?
Yes. 37230-AG060 is listed as an interchange number for the LuK LMC469 clutch master cylinder.
