LuK Clutch Master Cylinder P/N:LMC380
LuK LMC510 clutch master cylinder for the 1980-1987 Ford F-600 V8 8.2L, the 1980-1991 F-600 V8 6.1L, the 1980-1994 F-600 V8 7.0L, the 1986-1993 F-600 6-cylinder 6.6L, the 1987-1989 F-600 6-cylinder 7.8L, the 1991 F-600 6-cylinder 7.8L, the 1992-1994 F-600 6-cylinder 5.9L and other vehicles turns clutch pedal movement into hydraulic pressure for the release system. The cylinder sits at the pedal end of that hydraulic release system.
A soft or sinking clutch pedal, trouble selecting gears or fluid near the cylinder can be signs of a failing clutch master cylinder. These signs alone do not prove this part is the problem, since a worn slave cylinder can give the same pedal feel.
This clutch master cylinder is listed for a wide range of Ford models, including the 1980-1990 Ford C8000 V8 10.4L and the 1980-1986 Ford FT800 V8 6.1L. Each takes one.
Interchange: M0736 · 5110540100
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the LuK LMC510 clutch master cylinder fit the 1980-1990 Ford C8000 V8 10.4L?
Yes, LuK LMC510 is listed for the 1980-1990 Ford C8000 V8 10.4L, and each vehicle takes one. If your vehicle is not named here, look it up in the "Vehicles it fits" section by year and engine.
What does the integrated travel sensor on a LuK clutch master cylinder do?
Where one is fitted, the sensor senses the clutch pedal position. That matters for start-stop systems and for functions like electric parking brake, hill-start and speed control.
What does the peak torque limiter in a LuK clutch master cylinder do?
On cylinders that have it, the limiter lowers the volume flow in the hydraulic system during sport driving. That helps keep sudden starts, such as slipping off the pedal, from overloading the powertrain.
How do I check a LuK LMC510 clutch master cylinder for problems?
With the engine off, look for fluid around this clutch master cylinder. A soft or sinking pedal or trouble getting into gear can also be signs, and a shop can test the hydraulic system.
Does the LuK LMC510 clutch master cylinder replace part number 5110540100?
Yes, 5110540100 is listed as an interchange number for the LuK LMC510 clutch master cylinder.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.