LuK LSC267 clutch release bearing and slave cylinder assembly for the 1987-1992 Jeep Wrangler 4-cylinder 2.5L and other vehicles transmits hydraulic pressure to the clutch release system. The release system links the pedal to the clutch, so its parts must work together for easy pedal operation and safely metered power flow.
- Concentric slave cylinder design for hydraulic clutch systems
- Release bearing and slave cylinder combined in one assembly
- Integrated travel sensor where the system needs one, to sense clutch pedal position
Quick facts
- Part: LuK LSC267 clutch release bearing and slave cylinder assembly
- Fits: the 1987-1992 Jeep Wrangler 4-cylinder 2.5L and other vehicles
A failing assembly can show up as a spongy or hard pedal, trouble getting into gear or fluid seepage near the transmission. These signs can also come from elsewhere in the clutch hydraulics, so with the engine off, look at the fluid reservoir level before ordering; a shop can test the rest.
Fits
This assembly is a direct-fit replacement for the 1987-1992 Jeep Cherokee 4-cylinder 2.5L and the 1987-1992 Jeep Comanche 4-cylinder 2.5L. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
- Type: concentric slave cylinder
- Engine: L4-2.5L
- Quantity per vehicle: 1
- Country of origin: China
In the box
This listing holds one assembly, and the vehicle takes one.
Interchange: 0 4723 875 · 0 4728 060 · 4638 464 · 4638 465 · 4723 875 · 4728 060 · 5 3005 967 · 5 3006 068 · 8 3503 383 · 8 3503 384 · 3182 600 238
N1750 · ZA3504A1 · 614045 · 5100056100 · N4901 · SN1750 · 619001 · 5591160
This part cross-references / interchanges with the following part numbers:
N1750, 0 4723 875, 0 4728 060, 4638 464, 4638 465, 4723 875, 4728 060, 5 3005 967, 5 3006 068, 8 3503 383, 8 3503 384, ZA3504A1, 614045, 5100056100, N4901, 3182 600 238, SN1750, 619001, 5591160
Frequently Asked Questions
Does the LuK LSC267 fit a 1987-1992 Jeep Cherokee 4-cylinder 2.5L?
Yes, LuK LSC267 is listed for the 1987-1992 Jeep Cherokee with the L4-2.5L engine. For another model, open the "Vehicles it fits" section and check your engine.
What does the travel sensor on a LuK clutch release bearing and slave cylinder assembly do?
It senses clutch pedal position, which start-stop, electric parking brake, hill-start and speed control functions rely on. LuK fits the sensor only where an application needs one.
Does the LuK LSC267 interchange with 4723 875?
Yes. 4723 875 is on the interchange list for LuK LSC267, along with 4728 060, 4638 464 and N1750.
Can a spongy clutch pedal mean the release bearing and slave cylinder assembly is failing?
Yes, it can, and so can a hard pedal or trouble getting into gear. A fault elsewhere in the clutch hydraulics can show up the same way, so a shop can test it.
Is the LuK LSC267 one piece or a separate bearing and cylinder?
This assembly combines the clutch release bearing and the slave cylinder in one piece, and this listing holds one.
