MAHLE 95-3359 engine full gasket set for the 1975-1976 Ford F-150 V8 5.9L or 6.4L and other vehicles seals the engine's major joints during a rebuild or reseal. It covers many of the engine's gasket and seal locations, but a few pieces are not part of it (see In the box).
- Composite cylinder head gasket
- Perforated steel exhaust manifold gasket and composite intake manifold gasket
- Cork-rubber oil pan gasket, plus a gasket for the oil pan drain plug
- Rubber rear main seal with a rear seal retainer and rear main cap seal
- Valve cover gasket, valve stem seals and timing cover gaskets/seal
Quick facts
- Part: MAHLE 95-3359 engine full gasket set
- Fits: 1975-1976 Ford F-150 V8 5.9L or 6.4L and other vehicles
- Condition: New
Oil seepage at the valve cover or oil pan, or a leak at a manifold or water pump joint, can mean a gasket has failed. Before you replace the gaskets, rule out a loose fastener or a warped sealing surface as the source of the leak. Head fasteners are not included, so plan on new ones.
Fits
Along with the 1975-1976 Ford F-150 V8 5.9L or 6.4L, the vehicles it fits include the 1965-1967 Ford F-250 V8 5.8L, the 1968-1976 F-250 V8 5.9L or 6.4L, the 1967-1969 Ford Mustang V8 6.4L and the 1967-1970 Mustang V8 7.0L. Each engine takes one set. If your car is not named here, look up its year, model and engine in the "Vehicles it fits" section.
Specifications
- Quantity per vehicle: 1 set
- Cylinder head gasket material: composite
- Exhaust manifold gasket material: perforated steel
- Intake manifold gasket material: composite
- Oil pan gasket material: cork-rubber
- Rear main seal material: rubber
- Fastener style: none
- Condition: New
- Country of origin: United States
In the box
Gaskets for the cylinder head, exhaust manifold, intake manifold, oil pan, oil pan drain plug, valve cover, timing cover, water pump, water outlet, fuel pump and distributor, plus a rear main seal and valve stem seals. The package also holds a rear seal retainer, rear main cap seal, O-ring and oil pump inlet. Not included: head fasteners, camshaft seal, intake manifold plenum gasket, EGR valve gasket, throttle body gasket and valley pan.
Interchange: 260-1035
FS 8554 PT · KS 2307 · KS31080
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
Will the MAHLE 95-3359 gasket set fit a 1967-1969 Ford Mustang V8 6.4L?
Yes, MAHLE 95-3359 fits the 1967-1969 Ford Mustang V8 6.4L and the 1967-1970 Mustang V8 7.0L. Other vehicles are in the "Vehicles it fits" section.
Does the MAHLE 95-3359 engine gasket set include head bolts?
No. MAHLE 95-3359 leaves out head fasteners, so plan on new bolts, and it also omits the camshaft seal, intake plenum gasket, EGR valve gasket, throttle body gasket and valley pan.
What is the cylinder head gasket in this set made of?
The cylinder head gasket in this gasket set is composite. The exhaust manifold gasket is perforated steel, and the oil pan gasket is cork-rubber.
How can I tell if a valve cover or oil pan gasket is leaking?
With the engine off and cool, look for oil seepage or a wet, dirty film along the valve cover or oil pan edge. Oil drips or a burning-oil smell can also point to a leak.
Does MAHLE 95-3359 replace the 260-1035 gasket set?
Yes. 260-1035 is one of the numbers MAHLE 95-3359 replaces.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review