Seal the throttle body to the intake and keep the air side leak-free with the MAHLE Fuel Injection Throttle Body Mounting Gasket G32057. It installs as a direct-fit replacement for the listed applications, including the 2013-2021 Acura ILX, 2009-2014 Acura TSX, 2008-2022 Honda Accord, and 2010-2019 Honda CR-V — plus the Acura NSX, RDX and TLX and the Honda Civic (2012-2015 and 2017-2021) and Crosstour; see the Buyer's Guide tab for the full list.
- Purpose: Seals the mating flange between the throttle body and the intake, keeping metered air routed through the intended path.
- Direct-fit: A direct-fit replacement gasket for the listed applications.
- Fresh replacement: A new gasket restores a clean seal whenever the throttle body is removed or serviced.
A hardened, cracked or leaking throttle body gasket can let unmetered air past the seal, which may show up as a vacuum leak, a lean condition or a rough or uneven idle. If a failed gasket is the cause, replacing it re-establishes the seal. Diagnose the source before ordering.
Interchange: 61557 · 17107-R40-A01 · 17107R40A01. Manufacturer part number G32057.
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
What does this gasket do?
It seals the mating flange between the throttle body and the intake, keeping metered air routed through the intended path instead of leaking past the joint.
Will it fit my vehicle?
It is a direct-fit replacement for the listed applications, including the 2013-2021 Acura ILX, 2009-2014 Acura TSX, 2008-2022 Honda Accord and 2010-2019 Honda CR-V. Check the Buyer's Guide tab.
What numbers does it interchange with?
It interchanges with 61557 and 17107-R40-A01 (also shown as 17107R40A01). Its own manufacturer part number is G32057.
What are signs this gasket may need replacing?
A cracked or leaking gasket can allow unmetered air past the seal, which may show up as a vacuum leak, a lean condition, or a rough or uneven idle. Diagnose the cause first.
Should I replace it when removing the throttle body?
Yes. Installing a new gasket whenever the throttle body is removed or serviced helps restore a clean, leak-free seal at the mounting flange.
Write a Review