Help keep lubricant inside the gearbox and dirt and water out with the SKF Manual Transmission Input Shaft Seal, part number 10494. This front seal is a direct-fit replacement for the listed applications, including the 1986-1988 Nissan Micra, 1988-1998 Isuzu Trooper, 2002-2015 Honda Civic, 2002-2010 Honda CR-V, 2003-2020 Honda Accord and 2004-2014 Acura TSX. See the Buyer's Guide tab for the full list and engine details.
The seal stays stationary at the front of the manual transmission while its lip rides on the rotating input shaft. It is designed to hold lubricant in and help keep contaminants out. It is also listed as a manual transmission main shaft seal.
SKF invented the first integrated shaft seal in 1928 and has kept developing new seal designs and bonding techniques since. It builds its seals to specific designs using premium materials chosen for each application and its environment.
Signs this seal may need replacing: lubricant seeping from the front of the transmission, a dropping transmission fluid level, or oil residue around the clutch area. Diagnose the leak source first. Consult the vehicle service information for the removal and installation procedure.
Interchange: CHR 10494 · 8-94422390-0 · 371-371200-23
CHR10494 · 8944223900 · 37137120023 · 91216PG1003 · 91216PG1005 · 975910494 · BH1937E · 97046698 · H50117103 · 8970466980 · 8970466990 · 8970466992 · 145810494 · N10494
This part cross-references / interchanges with the following part numbers:
What does the SKF 10494 seal do?
It seals the front of the manual transmission around the rotating input shaft. It is designed to hold lubricant in and help keep dirt and water out.
What are the seal's case and spring made of?
SKF forms the body from deep drawn sheet steel for a rigid, stress-resistant case. The garter spring uses cold drawn steel wire for fluid retention.
Which vehicles does the SKF 10494 fit?
Applications include the 2003-2020 Honda Accord, 2002-2010 Honda CR-V, 2004-2014 Acura TSX and 1988-1998 Isuzu Trooper, among others. See the Buyer's Guide tab for the full list.
How can I tell if my input shaft seal is leaking?
Common signs are lubricant seeping from the front of the transmission and a falling fluid level. Other seals and gaskets can leak in the same area, so confirm the source before replacing.
What part numbers does the SKF 10494 replace?
It cross-references numbers including 91216PG1003, 91216PG1005, 8-94422390-0, BH1937E and N10494. The full list is on the Interchange line in the description.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
