Rear Shaft Repair Sleeve for 1973-1974 American Motors Matador - SKF 99156

$31.99

SKF Automatic Transmission Repair Sleeve 99156

SKF Automatic Transmission Repair Sleeve 99156 - view 2

Part number: 99156

UPC: 085311041423

Condition: New

Weight: 0.24 LBS

Item Package Quantity: 1

$31.99

Current Stock: 7

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

SKF Automatic Transmission Repair Sleeve P/N:99156

$31.99

Description

Give a grooved shaft a fresh sealing surface without pulling it from the vehicle with the SKF Manual / Automatic Transmission Repair Sleeve / Transfer Case Repair Sleeve 99156, an SKF Speedi-Sleeve and tool kit. It is cataloged for the rear position on the 1973-1974 American Motors Matador. This sleeve is listed under several names, so you may see it called a manual transmission repair sleeve, an automatic transmission repair sleeve or a transfer case repair sleeve.

Refinishes worn shafts: The sleeve slides over the worn area of the shaft where the seal lip rides, giving the seal a new contact surface.
Installs with the shaft in place: You do not have to remove the shaft, and you keep the same seal size.
An alternative to regrinding: Regrinding and refinishing a shaft takes time and can leave a poor-quality sealing surface. Installing the sleeve can take less than five minutes.
Stainless construction with tool included: The sleeve is made from AISI 304 stainless steel, and the kit includes an installation tool to help it go on correctly.

Signs this repair may be needed include fluid seeping past a seal, or a groove worn into the shaft where the old seal lip rode. If a worn shaft surface is the cause of the leak, this sleeve is designed to give the seal a new surface to run on. Inspect the shaft and seal to find the cause before replacing parts.

Interchange: 99156.1 · CHR 480149 · CHR 99156
991561 · CHR480149 · CHR99156 · 6002058 · 9759480149 · 975999156 · 1458480149 · 145899156 · 99156CHR · N99156 · NN99156 · 99156RS

Manufacturer's description

Product specs

Vehicles it fits

Interchange numbers

This part cross-references / interchanges with the following part numbers:

6002058, 99156.1, 9759480149, 975999156, CHR 480149, CHR 99156, 1458480149, 145899156, 99156, 99156CHR, N99156, NN99156, 99156RS

Buyer's Q&A

Frequently Asked Questions

What does this repair sleeve do?

It slides over the worn section of a shaft where a seal lip rides and gives the seal a fresh contact surface. The shaft does not need regrinding and the seal size stays the same.

What is the sleeve made of, and what comes in the kit?

The sleeve is made from AISI 304 stainless steel. It comes with an installation tool to help seat it properly on the shaft.

Do I need to remove the shaft to install it?

No. The sleeve can be installed with the shaft in place, and it does not require a change in seal size.

What signs suggest a shaft may need a repair sleeve?

A leak at the seal or a visible groove worn into the shaft where the seal lip rides may mean the sealing surface needs refinishing. Inspect the shaft and seal to find the cause first.

Will this fit my 1973-1974 American Motors Matador?

Yes. It is cataloged for the rear position on the 1973-1974 American Motors Matador.